Features

ESD Protection for 1 Line with Bi-directional

Provide ESD protection for the protected line to
IEC 61000-4-2 (ESD) ±15kV (air), ±12kV (contact)

Ultra low capacitance: 0.45pF typical

Ultra low leakage current

For low operating voltage applications: 5V and
below

0402 small DFN package saves board space

Protect one I/O line

Fast turn-on and Low clamping voltage

Solid-state silicon-avalanche and active circuit
triggering technology

Green Part

AEC-Q101 qualified
Applications

Hand Held Portable Applications

Wearable Devices

Antenna applications

USB3.0 / USB2.0

High Definition Multi-media Interface (HDMI)

Digital Visual Interface (DVI)

Display Port

Serial ATA

Automotive Applications
Description
AZ9565-01F is a design which includes a
bi-directional ESD rated clamping cell to protect
high speed data interfaces in an electronic
systems. The AZ9565-01F has been specifically
designed to protect sensitive components which
are connected to data and transmission lines
from over-voltage caused by Electrostatic
Discharging (ESD).
AZ9565-01F is a unique design which includes
proprietary clamping cells with ultra low
capacitance in a small package. During transient
conditions, the proprietary clamping cells prevent
over-voltage on the control/data lines, protecting
any downstream components.
AZ9565-01F is bi-directional and may be used on
lines where the signal swings above and below
ground.
AZ9565-01F may be used to meet the ESD
immunity requirements of IEC 61000-4-2, Level 4
(±15kV air, ±8kV contact discharge).