Features

ESD Protection for 1 line with Uni-directional

Provide ESD protection for the protected line to
IEC 61000-4-2 (ESD) ±30kV (air/contact)
IEC 61000-4-4 (EFT) ±80A (5/50ns)
IEC 61000-4-5 (Lightning) 6A (8/20ms)

Suitable for, 15V and below, operating voltage
applications

0402 small DFN package saves board space

Protect one I/O line or one power line

Fast turn-on and Low clamping voltage

Solid-state silicon-avalanche and active circuit
triggering technology

Green Part
Applications

Power Supply Protection

Power Management

Portable Devices

Hand Held Portable Applications

Low speed data and control lines protection

Cellular Handsets and Accessories

Notebooks, desktops, and servers

Peripherals
Description
AZ4115-01F is a design which includes a
uni-directional ESD rated clamping cell to protect
one power line, or one control line, or one low
speed data line in an electronic systems. The
AZ4115-01F has been specifically designed to
protect sensitive components which are
connected to power and control lines from
over-voltage damage and latch-up caused by
Electrostatic Discharging (ESD), Electrical Fast
Transients (EFT), Lightning, and Cable
Discharge Event (CDE).
AZ4115-01F is a unique design which
includes proprietary clamping cell in a single
package. During transient conditions, the
proprietary clamping cell prevents over-voltage
on the power line or control/data lines, protecting
any downstream components.
AZ4115-01F may be used to meet the ESD
immunity requirements of IEC 61000-4-2, Level 4
(±15kV air, ±8kV contact discharge).