Features

Transient Protection for High-Speed Data
Lines-to-GND and Lines-to-Lines.

Provide Transient Protection for the Protected
Lines to
IEC 61000-4-2 (ESD) ±30kV (air/contact)
IEC 61000-4-4 (EFT) 80A (5/50ns)
IEC 61000-4-5 (Lightning) 45A (8/20μs)
Cable Discharge Event (CDE)

DFN3020P10E (3.0x2.0mm) Package.

Specific Pin Out For Easy Board Layout.

Fast Turn-On and Low Clamping Voltage.

Low Capacitance for High Speed Interfaces.

Low Operating Voltage: 3.3V.

Low Leakage Current

Solid-State Silicon-Avalanche and Active
Circuit Triggering Technology.

Green part
Applications

WAN/LAN Device

10/100/1000 Ethernet

LVDS Interfaces

Switching Systems

Computers

Instruments
Description
AZ3133-08F is a design which includes surge
rated diode arrays to protect high speed data
interfaces in an electronic systems. The
AZ3133-08F has been specifically designed to
protect sensitive components which are
connected to data and transmission lines from
over-voltage damage and latch-up caused by
Electrostatic Discharging (ESD), Electrical Fast
Transients (EFT), Lightning, and Cable
Discharge Event (CDE).
AZ3133-08F is a unique design which includes
surge rated, low capacitance steering diodes and
a unique design of clamping cell which is an
equivalent TVS diode in a single package. During
transient conditions, the steering diodes direct
the transient to either the power line or to the
ground line. The internal unique design of
clamping cell prevents over-voltage on the power
line, protecting any downstream components.
AZ3133-08F may be used to meet the ESD
immunity requirements of IEC 61000-4-2, Level 4
±15kV air, ±8kV contact discharge).