Description
3M™ Scotchcast™ Flexible Power Cable Splicing Kits 82-F and 82-BF Series are flexible inline and tap splices for use on non-shielded portable power cables and cords. These splices are designed to be used on single or multiple conductor cables, depending on the voltage rating. The 82-F1 and 82-F2 inline splices will accommodate a single-conductor cable rated up to 5 kV or single and multiple conductor cables and cords rated up to 1000 Volts (600/2000 Volts mine portable cable rating). The combined cable diameter range for these two is 0.25 – 1.2 inches (6 – 30 mm), with a maximum single conductor size of 4/0 AWG. The 82-BF1 tap splice can accommodate cables and cords rated up to 1000 Volts (600/2000 Volts mine portable cable rating) ranging in diameter from 0.25 – 0.8 inches (6 – 20 mm) with a maximum single conductor size of 1/0 AWG. These splice kits are based on 3M™ Scotchcast™ Flame-Retardant Compound 2131 for toughness, flexibility, environmental protection and flame retardancy. The completed splices carry Mine Safety and Health Administration Acceptance 07-KA060002-MSHA when installed in accordance with the included instructions. Kit Contents Each kit contains the following materials as appropriate to make one splice or cable repair (connectors are not included due to kit range and conductor size specificity):  One-piece removable mold  3M™ Scotchcast™ Flame-Retardant Compound 2131  Scotch® Rubber Splicing Tape 23, for sealing mold ends  3M™ Three-M-Ite™ Elek-Tro-Cut™ Abrasive Cloth 80J Grit  Instructions showing proper installation techniques for splicing non-shielded portable power cables and cords

Features
■ MSHA Accepted – carries Mine Safety and Health Administration acceptance 07-
■ KA060002-MSHA
■ 3M™ Scotchcast™ Flame-Retardant Compound 2131 – self-curing resin bonds to itself and most modern cable jackets, and requires no torch or other external heat source; forms a splice or repair that is abrasion resistant and flame retardant
■ Semi-flexible compound – allows “permanent” splice to bend with cable; for installation, handling, reeling, etc.
■ Smooth tapered splice profile – eliminates cable hang-ups and splice end-lifting