Description
3M™ Scotchlok™ Copper Compression Connectors, 10000 Series are one-piece, standard-barrel, seamless copper connectors and are designed to cover a wide range of conductor sizes from 6 AWG through 1000 kcmil (MCM). The 11000 Series are onepiece, seamless, long-barrel copper connectors and are designed to cover a range of conductor sizes from 2/0 AWG through 1000 kcmil (MCM). They are designed to connect copper conductors. Each connector is electro-tin plated to resist electrolytic corrosion. They are installed using standard industry tooling. Chamfered ends and an integral center cable stop ensure simplicity and ease of conductor insertion. Agency Approvals and Self Certifications UL Listed, UL Standard 486A-486B, File No. E23438 CSA Certified, File No. 015503

Features
■ Simple installation using readily available tools
■ Integral center cable stop
■ Manufactured using tin-plated copper
■ Color coded printing for easy connector identification

Applications
■ Standard-Barrel: To connect copper conductors from 6 AWG through 1000 kcmil
■ (MCM)
■ Long-Barrel: To connect copper conductors from 2/0 AWG through 1000 kcmil
■ (MCM)
■ For low and medium voltage up to 35 kV
■ For indoor and outdoor use Typical Properties Not for specifications. Values are typical, not to be considered minimum or maximum. Properties measured at room temperature 73°F (23°C) unless otherwise stated. The 10000 and 11000 Series connectors, when crimped with approved die sets, can be used on cables with an operating temperature of 221oF (105oC) and an emergency overload rating of 284oF (140oC). The connectors pass the requirements of UL486A (Underwriters Laboratories standard for safety) and are CSA Certified. The current rating of these connectors meets or exceeds the current rating of the conductor size for which it is intended.