Features
■ Heavy weight release liner
■ − EtO & Gamma compatible
■ Easy to apply
■ − Clear film
■ Adheres to a wide range of substrates Composition: Tape caliper w/o liner 4.9 mil (0.12 mm) Double Coated Polyethylene Tape Carrier 3 mil (0.08 mm) Transparent Polyethylene Film Adhesive Tackified Acrylic designed for medical/surgical use Release Liner 80 lb. Bleached Kraft paper, silicone release coated both sides (4.5 mil/0.10 mm) Typical Properties+: 180° Peel Adhesion to Stainless Steel 53 ounces/inch width (1.5 Kg/25 mm) (14.7 N/25 mm) Liner Release 14 gm/inch width (14 gm/25 mm) +3M test methods are available upon request. Roll Description: Tape supplied on 3 inch (76 mm) diameter cores. Length 600 yards (548 m) ± 2% Maximum Width 48 inch (122 cm) ± 1/32 in (1.0 mm) Maximum Splices: Splices on the tape are intended for continuous processing. Roll Width Maximum Number of Splices per Roll < 8 inch (20 cm) 2 per 100 yd (91 m) 3 per 200 yd (183 m) 6 per 600 yd (548 m) Information on the splice frequency in roll widths greater than 8 inch (20 cm) is available upon request. Packaging and Recommended Storage Product as supplied in original packaging will maintain stated properties for a period of two years from date stamped on shipping container when stored at temperatures of 50-80°F (10-27°C) and a relative humidity between 40-60 percent. Please see reverse side for important product, safety and warranty information.