The ISL32470E, ISL32472E, ISL32475E, and ISL32478E are fault-protected, extended common-mode range differential transceivers that exceed the RS-485 and RS-422 standards for balanced communication. The RS-485 bus pins (driver outputs and receiver inputs) are fault protected against overvoltages up to ±60V and are protected against ±16.5kV ESD strikes without latch-up. Additionally, these transceivers operate in environments with common-mode voltages up to ±15V (exceeds the RS-485 requirement), making this fault-protected RS-485 family one of the most robust on the market.

Features
• Fault protected RS-485 bus pins . . . . . . . . . . . . . . Up to ±60V
• Extended common-mode range. . . . . . . . . . . . . . . . . . . . ±15V larger than required for RS-485
• 1/4 unit load for up to 128 devices on the bus
• ±16.5kV HBM ESD protection on RS-485 bus pins
• High transient over-voltage tolerance . . . . . . . . . . . . . . . ±80V
• Full fail-safe (open, short, terminated) RS-485 receivers
• High Rx IOL for opto-couplers in isolated designs
• Hot plug circuitry: Tx and Rx outputs remain three-state during power-up/power-down
• RS-485 data rates. . . . . . . . . . . . . . . . . . . . . .250kbps to 15Mbps
• Low quiescent supply current. . . . . . . . . . . . . . . . . . . . 2.3mA
• Ultra low shutdown supply current. . . . . . . . . . . . . . . . . . 10µA

Applications
• Utility meters and automated meter reading systems
• High node count RS-485 systems
• PROFIBUS and RS-485 based field bus networks, factory automation
• Security camera networks
• Building lighting and environmental control systems
• Industrial/process control networks