INTRODUCTION
The UT80CRH196KD is compatible with industry standard’s MCS-96 instruction set. The UT80CRH196KD is supported by commercial hardware and software development tools.
Built on UTMC’s Commercial RadHardTM epitaxial CMOS technology, the microcontroller is hardened against ionizing dose and charged particles. The microcontroller’s on-board 1000 byte scratch-pad SRAM and flip-flops can withstand charged particles with energies up to 25 MeV-cm2
/mg.

FEATURES
❐ 20MHz 16-bit Microcontroller compatible with industry standard’s MCS-96 ISA
   - Register to Register Architecture
   - 1000 Byte Register RAM
❐ Three 8-bit I/O Ports
❐ On-board Interrupt Controller
❐ Three Pulse-Width Modulated Outputs
❐ High Speed I/O
❐ UART Serial Port
❐ Dedicated Baud Rate Generator
❐ Software and Hardware Timers
   - 16-Bit Watchdog Timer, Four 16-Bit Software Timers
   - Three 16-Bit Counter/Timers
❐ Radiation-hardened process and design; total dose irradiation testing to MIL-STD-883 Method 1019
   - Total-dose: 100K rads(Si)
   - Effective LET threshold: 25 MeV-cm 2/mg
   - Saturated cross section: 3.66e-7cm2/bit
   - Latchup immune (LET > 128 MeV-cm2/mg)
❐ Error detection and correction for external memory accesses
❐ QML Q and QML V compliant part
❐ Standard Microcircuit Drawing 5962-98583