SFSKB2M30GF00-R1
AI

## Technical Overview: SFSKB2M30GF00-R1
The **SFSKB2M30GF00-R1** is a high-performance **SFECV Series Surface Mount Ceramic Filter** manufactured by **Murata Electronics**. These components are primarily used in the Intermediate Frequency (IF) stages of FM receivers to provide selectivity and noise rejection.
---
### 1. Key Specifications
The following table highlights the critical electrical and physical parameters of this component:
| Parameter | Specification |
| :--- | :--- |
| **Center Frequency (fc)** | 2.300 MHz |
| **Bandwidth (3dB)** | 30 kHz ± 10 kHz |
| **Insertion Loss** | 6.0 dB max |
| **Input/Output Impedance** | 1000 $\Omega$ |
| **Package Type** | SMD (Surface Mount Device) |
| **Dimensions** | 6.9 x 3.1 x 2.0 mm |
| **Operating Temperature** | -20°C to +80°C |
---
### 2. Functional Electronic Role
This part acts as a **Band-pass Filter**. Its primary functions include:
* **Frequency Selection:** It allows a specific narrow band of frequencies (centered at 2.3 MHz) to pass through while significantly attenuating frequencies outside this range.
* **Spurious Signal Suppression:** It filters out unwanted harmonics and noise generated during the mixing process in radio circuits.
* **Impedance Matching:** With a standard 1000 $\Omega$ impedance, it is designed to interface seamlessly with standard IF amplifier stages.
---
### 3. Construction and Material
* **Piezoelectric Ceramic:** The device utilizes the piezoelectric effect of ceramic materials. Electrical signals are converted into mechanical vibrations; only the vibrations at the resonant frequency pass through to be converted back into electrical signals at the output.
* **Small Footprint:** As part of the SFECV series, it is designed for lead-free soldering and high-density mounting on PCBs (Printed Circuit Boards).
---
### 4. Typical Applications
1. **FM Radio Receivers:** Used in the IF stage for signal processing.
2. **Communication Equipment:** Narrow-band data transmission systems.
3. **Remote Control Systems:** Filtering carrier signals in wireless control units.
---
- ⤷
What are the recommended soldering profiles for the SFSKB series to avoid ceramic cracking?
- ⤷ How does the 30 kHz bandwidth affect the audio quality in FM applications?
- ⤷ Are there alternative center frequencies available in the Murata SFECV product line?