SE2529L-R
AI

# Overview of the SE2529L-R
The **SE2529L-R** is a highly integrated Power Amplifier (PA) designed by Skyworks Solutions. It is specifically engineered for **2.4 GHz WLAN (IEEE 802.11b/g/n)** applications, commonly found in mobile devices, routers, and tablets.
---
## 1. Technical Specifications
The following table highlights the primary electronic characteristics of the SE2529L-R:
| Parameter | Specification |
| :--- | :--- |
| **Frequency Range** | 2400 MHz to 2500 MHz |
| **Supply Voltage (VCC)** | 3.0V to 4.2V |
| **Output Power (Pout)** | +26 dBm (802.11b), +23 dBm (802.11g) |
| **Gain** | 30 dB (Typical) |
| **Quiescent Current (Iccl)** | ~140 mA |
| **Package Type** | 16-pin QFN (3mm x 3mm x 0.9mm) |
---
## 2. Key Electronic Components & Features
### A. Power Amplifier (PA) Stages
The device typically features a **three-stage amplifier architecture**. This design allows it to provide high gain while maintaining linearity, which is critical for complex modulations like OFDM (used in 802.11g/n).
### B. Power Detector
The SE2529L-R includes an integrated **power detector**.
- **Function:** It provides a closed-loop power control system by outputting a DC voltage proportional to the RF output power.
- **Benefit:** This helps the system adjust the gain to maintain constant transmit power despite temperature variations or battery voltage drops.
### C. Matching Circuitry
The chip incorporates internal input and output matching.
- **Input:** Matched to **50 Ω**, reducing the need for external surface-mount devices (SMDs).
- **Output:** Partially matched; usually requires a few external inductors/capacitors to optimize for specific frequency bands.
### D. Enable/Disable Pin (EN)
This is a logic-level control pin.
- When `High`, the PA is active.
- When `Low`, the device enters a low-current "Sleep Mode" to conserve battery life in mobile applications.
---
## 3. Pin Configuration Summary
The SE2529L-R uses a QFN package with the following functional pin groups:
| Pin Type | Name | Description |
| :--- | :--- | :--- |
| **RF Input** | RFIN | 2.4 GHz signal entry point. |
| **RF Output** | RFOUT | Amplified signal exit to the antenna. |
| **Power Supply** | VCC1, VCC2, VCC3 | Voltage supply for the different internal stages. |
| **Control** | EN | Digital enable pin. |
| **Detection** | DET | Analog voltage output for power monitoring. |
| **Ground** | GND | Thermal paddle and ground pins for heat dissipation. |
---
## 4. Application Context
The SE2529L-R is primarily used in:
1. **Access Points and Routers:** To extend the range of the 2.4 GHz Wi-Fi signal.
2. **PC Cards:** Mini-PCIe or M.2 Wi-Fi modules.
3. **Consumer Electronics:** Tablets and laptops requiring stable high-speed data transmission.
- ⤷
What are the recommended external components for the output matching network of the SE2529L-R?
- ⤷ How does the power detector voltage (DET) scale with the output power (dBm)?
- ⤷ What is the maximum operating temperature range for this specific Skyworks PA?