SC1453_06
AI

The **SC1453-06** is a low-dropout (LDO) linear voltage regulator manufactured by Semtech. It belongs to a family of regulators designed specifically for battery-powered applications where space, low noise, and low power consumption are critical.
---
## 1. Technical Specifications
The "06" suffix typically denotes a specific output voltage variant. In the SC1453 series, the numeric code indicates the output voltage.
| Parameter | Value/Description |
| :--- | :--- |
| **Component Type** | LDO (Low Dropout) Linear Regulator |
| **Output Voltage** | 3.0V (Standard for the -06 variant) |
| **Input Voltage Range** | 2.5V to 6.5V |
| **Output Current** | Up to 150mA |
| **Dropout Voltage** | ~120mV at 150mA load |
| **Quiescent Current** | ~75µA (Active), <1µA (Shutdown) |
| **Package Type** | SOT-23-5 (5-pin Small Outline Transistor) |
---
## 2. Key Features
* **Ultra-Low Dropout:** Minimizes power loss and allows the circuit to function even when the battery voltage is very close to the desired output voltage.
* **Enable Pin (EN):** Allows the system to shut down the regulator to save power, reducing current draw to near zero.
* **Stability:** Designed to be stable even with low-cost ceramic capacitors.
* **Protection Circuits:** Includes internal thermal shutdown and short-circuit current limiting.
---
## 3. Pin Configuration (SOT-23-5)
The SC1453 usually follows a standard 5-pin layout:
| Pin Number | Name | Function |
| :--- | :--- | :--- |
| 1 | **VIN** | Input Voltage Supply |
| 2 | **GND** | Ground Reference |
| 3 | **EN** | Enable Input (High = On, Low = Off) |
| 4 | **BYP** | Bypass Pin (Optional capacitor for noise reduction) |
| 5 | **VOUT** | Regulated Output Voltage |
---
## 4. Typical Application Circuit
To use the SC1453_06, you generally need two capacitors to ensure stability and smooth DC output.
```text
[Input Voltage] ----+----[ VIN ] [ VOUT ]----+---- [Regulated 3.0V]
| |
[Cin] [Cout]
| |
[Ground] -----------+----[ GND ]--------------+---- [Ground]
```
* **Cin:** 1µF ceramic capacitor (recommended).
* **Cout:** 1µF to 2.2µF ceramic capacitor.
* **C-byp:** An optional 10nF capacitor can be connected to the BYP pin to further reduce output noise.
---
## 5. Common Use Cases
* **Mobile Handsets:** Providing clean power to RF stages.
* **Digital Cameras:** Regulating power for image sensors.
* **Battery Management:** Efficiently stepping down Li-Ion battery voltage (3.6V - 4.2V) to a stable 3.0V.
- ⤷
What is the difference between the SC1453-06 and the SC1453-08?
- ⤷ Can I use an electrolytic capacitor instead of a ceramic one for the output?
- ⤷ How do I calculate the power dissipation of this LDO in my circuit?