S02-04-R
AI

The **S02-04-R** is a specific electronic component, typically categorized as a **Surface Mount Device (SMD) Test Point** or a **Shield Clip**, often manufactured by companies like **Harwin**.
Below is a detailed breakdown of its electronic characteristics and specifications.
---
## 1. Component Overview
The S02-04-R is primarily designed for high-speed automated assembly. It serves as a mechanical interface on a Printed Circuit Board (PCB) to hold RFI (Radio Frequency Interference) shielding cans in place without the need for secondary soldering.
### Key Specifications
| Parameter | Specification |
| :--- | :--- |
| **Component Type** | RFI Shield Clip (Surface Mount) |
| **Material** | Beryllium Copper |
| **Finish** | Tin over Nickel |
| **Mounting Style** | SMT (Surface Mount Technology) |
| **Packaging** | Tape and Reel (indicated by the "-R") |
| **Minimum Shield Thickness** | 0.13mm |
| **Maximum Shield Thickness** | 0.23mm |
---
## 2. Electronic & Mechanical Functions
The S02-04-R fulfills two primary roles in an electronic assembly:
### A. Electrical Grounding
* **Low Resistance Path:** By clamping the metal shield can directly to the PCB ground plane, it ensures a low-impedance path to ground.
* **EMI/RFI Suppression:** It forms a Faraday cage around sensitive components (like RF transceivers or CPUs) to prevent electromagnetic interference.
### B. Mechanical Retention
* **Spring Action:** The Beryllium Copper material provides high elasticity, allowing the clip to grip the shield firmly even after multiple insertion cycles.
* **Side-Entry/Top-Entry:** Depending on the board layout, these clips allow the shield to be "snapped" into place manually after the reflow soldering process is complete.
---
## 3. Advantages in PCB Design
Using the S02-04-R instead of soldering a shield directly to the board offers several benefits:
1. **Maintenance:** The shield can be removed to inspect or repair components without using a soldering iron, reducing the risk of heat damage.
2. **Manufacturing Speed:** Because it comes in "Tape and Reel" packaging, it can be placed by standard Pick-and-Place machines just like a resistor or capacitor.
3. **Stress Reduction:** It eliminates the thermal stress and potential warping caused by soldering large metal "fences" or cans to the PCB.
---
## 4. Footprint and Soldering
The part is designed for **Reflow Soldering**. The pads on the PCB should be slightly larger than the component base to ensure a strong solder fillet.
```markdown
Recommended Pad Dimensions (Approximate):
- Length: 2.0mm
- Width: 1.0mm
- Gap between pads: Varies by shield dimensions
```
- ⤷
What are the recommended reflow temperature profiles for Beryllium Copper clips?
- ⤷ Can the S02-04-R be used for power grounding or only for RFI shielding?
- ⤷ What are the common alternatives to the Harwin S02-04-R?