поискавой системы для электроныых деталей
  Russian  ▼
ALLDATASHEETRU.COM

X  

  • NET-75C

  • AI
    The **NET-75C** is a 75-watt, triple-output AC/DC switching power supply manufactured by Mean Well. It is widely used in industrial automation, telecommunications, and networking equipment due to its high efficiency and compact form factor. --- ## 1. Core Technical Specifications The "C" in NET-75C typically denotes a specific output voltage configuration (5V, 15V, and -15V). | Parameter | Specification | | :--- | :--- | | **Input Voltage Range** | 85 ~ 264VAC / 120 ~ 370VDC | | **Total Power** | 72 - 75 Watts | | **Cooling** | Free air convection | | **Protections** | Short circuit, Overload, Overvoltage | | **Isolation Class** | Class I (with Ground) | --- ## 2. Triple Output Configuration The NET-75C provides three distinct DC rails. The primary 5V rail usually features a higher current capacity to power logic circuits, while the ±15V rails are used for operational amplifiers or peripheral sensors. | Output Channel | Rated Voltage | Rated Current | Current Range | | :--- | :--- | :--- | :--- | | **CH1** | +5V | 7.0A | 1.0 ~ 8.0A | | **CH2** | +15V | 2.5A | 0.3 ~ 3.0A | | **CH3** | -15V | 0.5A | 0.0 ~ 0.5A | --- ## 3. Key Electronic Components & Design The internal circuitry follows a standardized "Switch-Mode Power Supply" (SMPS) topology. ### A. Input Stage (EMI Filtering & Rectification) * **EMI Filter:** Consists of X and Y capacitors and a common-mode choke to prevent electrical noise from leaking back into the AC line. * **Bridge Rectifier:** Converts AC input to a high-voltage pulsating DC. * **Bulk Capacitor:** Usually a high-voltage electrolytic capacitor (e.g., 400V-450V rating) to smooth the DC bus. ### B. Switching & Transformation * **PWM Controller IC:** Manages the duty cycle of the switching transistor to maintain stable output voltage. * **Power MOSFET:** High-speed switch that "chops" the DC voltage into high-frequency pulses. * **Main Transformer:** A ferrite-core transformer that provides galvanic isolation and steps down the high-frequency AC to lower voltages. ### C. Output Stage (Rectification & Filtering) * **Schottky Diodes:** Used for secondary side rectification due to their low forward voltage drop and fast switching speed. * **Filter Inductors & Capacitors:** Form low-pass filters to remove high-frequency ripples from the DC outputs. --- ## 4. Safety and Compliance The device includes specific electronic protections to prevent damage to connected hardware: * **Overload Protection:** Typically triggers at 110-150% of rated output power using a "hiccup mode" (recovers automatically after the fault is removed). * **Overvoltage Protection:** Specifically monitors the +5V rail (CH1) to prevent damage to sensitive logic components (triggers between 5.75V and 6.75V). ---
    ✨ Follow-up Questions
    • ⤷ What are the differences between the NET-75A
    • ⤷ NET-75B
    • ⤷ and NET-75C models?
    • ⤷ How do I calculate the total power consumption if I use all three channels?
    • ⤷ What is the meaning of 'Hiccup Mode' in the context of Mean Well power supplies?