MGFS304812-R
AI

The **MGFS304812-R** is a high-performance, isolated DC-DC converter manufactured by **Cosel**. It is part of the MGFS series, known for its high power density, wide input voltage range, and industry-standard 1x1 inch footprint.
---
### ## Technical Specifications
The following table summarizes the key electrical characteristics of the MGFS304812-R:
| Parameter | Specification |
| :--- | :--- |
| **Manufacturer** | Cosel |
| **Output Power** | 30 Watts |
| **Input Voltage Range** | 18V to 76V DC (Wide 4:1 Input) |
| **Output Voltage** | 12V DC |
| **Output Current** | 2.5 A |
| **Efficiency** | 89% (Typical) |
| **Isolation Voltage** | 1,500V DC (1 minute) |
| **Package / Case** | Six-sided shielded metal case (1" x 1") |
| **Operating Temp** | -40°C to +85°C |
---
### ### Key Electronic Features
1. **Wide 4:1 Input Range**: Unlike standard 2:1 converters, this part can handle a vast range of input voltages (18V to 76V). This makes it ideal for systems running on 24V or 48V battery rails where significant fluctuations occur.
2. **Built-in Protections**:
* **Overcurrent Protection**: Automatically recovers after the fault is removed.
* **Overvoltage Protection**: Shuts down the unit to protect the load if the output exceeds safety limits.
* **Thermal Protection**: Prevents damage from overheating.
3. **Remote ON/OFF**: Features a control pin that allows the system to toggle the power supply electronically without a mechanical switch.
4. **Adjustable Output (TRIM)**: The output voltage can be adjusted (typically ±10%) using an external resistor to compensate for voltage drops in long wiring.
5. **Six-Sided Shielding**: The metal case acts as a Faraday cage, significantly reducing Electromagnetic Interference (EMI) conducted to nearby sensitive components.
---
### ### Pin Configuration (Top View)
| Pin Number | Name | Function |
| :--- | :--- | :--- |
| 1 | +VIN | Positive Input Voltage |
| 2 | -VIN | Negative Input Voltage |
| 3 | RC | Remote Control (ON/OFF) |
| 4 | +VOUT | Positive Output Voltage |
| 5 | -VOUT | Negative Output Voltage |
| 6 | TRM | Output Voltage Adjustment (Trim) |
---
### ### Typical Application Circuit
To ensure stability and reduce ripple, external capacitors are usually recommended:
```c
// Basic Connection Diagram
[ +Vin ] ---- [ C1 (Input Cap) ] ---- [ Pin 1 (+VIN) ]
[ -Vin ] ----------------------------- [ Pin 2 (-VIN) ]
[ Pin 4 (+VOUT) ] ---- [ C2 (Output Cap) ] ---- [ + Load ]
[ Pin 5 (-VOUT) ] ------------------------------ [ - Load ]
```
- ⤷
What are the recommended values for the external input and output capacitors?
- ⤷ How does the Remote Control (RC) pin logic work (Positive vs Negative)?
- ⤷ Can this module be used in parallel to increase output power?