IDT7140LA55TFB
AI

## Overview of IDT7140LA55TFB
The **IDT7140LA55TFB** is a high-speed, low-power **1K x 8 Dual-Port Static RAM (SRAM)**. It is designed to allow two independent systems to access a common memory space simultaneously without conflict, making it ideal for inter-processor communication.
---
### Key Technical Specifications
| Parameter | Specification |
| :--- | :--- |
| **Architecture** | 1,024 words x 8 bits (8 Kbit total) |
| **Access Time** | 55 ns |
| **Power Rating** | Low Power (LA Version) |
| **Package Type** | TFB (Thin Quad Flatpack / TQFP) |
| **Interface** | Parallel (Dual-Port) |
| **Operating Voltage** | 5V ± 10% |
---
### Core Electronic Characteristics
#### 1. Dual-Port Architecture
The device features two completely independent ports (Left and Right) with their own control, address, and I/O pins. This allows:
* **Asynchronous Operation:** The two ports can operate at different speeds or phases.
* **Simultaneous Access:** Both sides can read or write to any location in the memory simultaneously (though logic is included to handle collision).
#### 2. Arbitration and Control Logic
To prevent data corruption during simultaneous writes to the same memory location, the IDT7140 includes:
* **BUSY Logic:** Hardware flags that indicate if the other port is currently accessing a shared address.
* **Interrupt Logic (INT):** Allows one processor to send a signal to another, facilitating "mailbox" style communication.
#### 3. Low Power Consumption (LA Suffix)
The "LA" designation indicates a low-power version. This part features an automatic power-down mode controlled by the Chip Enable ($\overline{CE}$) pins, reducing power consumption significantly when the port is not active.
---
### Pin Functionality Groups
| Pin Type | Description |
| :--- | :--- |
| **$A_0 - A_9$** | Address inputs for selecting one of the 1024 bytes. |
| **$I/O_0 - I/O_7$** | Data input/output pins for 8-bit data transfers. |
| **$\overline{CE}$** | Chip Enable; activates the specific port. |
| **$\overline{OE}$** | Output Enable; controls the data output buffers. |
| **$R/\overline{W}$** | Read/Write control signal. |
| **$\overline{BUSY}$** | Output signal indicating an address contention. |
---
### Common Applications
* **Inter-processor Communication:** Connecting a Microcontroller to a Digital Signal Processor (DSP).
* **Shared Memory:** Used in networking hardware to move data packets between different processing stages.
* **Buffer Memory:** Acts as a high-speed buffer for data acquisition systems where data is captured by one circuit and read by another.
- ⤷What is the functional difference between the IDT7140 and the IDT7130?
- ⤷ How does the BUSY logic handle simultaneous write attempts to the same address?
- ⤷ Are there modern 3.3V alternatives to this 5V dual-port SRAM?