HVS-2F-R
AI

The **HVS-2F-R** is a specialized high-voltage reed relay, typically manufactured by companies like Standex Electronics (OKI). These components are designed to switch high voltages while maintaining high isolation in a compact PCB-mount form factor.
---
### 1. Key Technical Specifications
The following table outlines the general electronic characteristics associated with the HVS series (specifically the 2-Form-A or 2-Form-B variants like the 2F-R):
| Parameter | Typical Value | Unit |
| :--- | :--- | :--- |
| **Contact Form** | 2 Form A (DPST-NO) | Type |
| **Max. Switching Voltage** | 1,000 | VDC |
| **Max. Breakdown Voltage** | 3,000 - 4,000 | VDC |
| **Max. Switching Current** | 0.5 - 1.0 | Amps |
| **Coil Voltage Options** | 5, 12, 24 | VDC |
| **Isolation Resistance** | $10^{10}$ to $10^{12}$ | Ohms |
| **Operating Temperature** | -20 to +85 | °C |
---
### 2. Major Electronic Sub-Components
The HVS-2F-R consists of several critical internal parts that define its performance:
#### A. The Reed Switch
* **Composition:** Two ferromagnetic blades (reeds) hermetically sealed in a glass envelope filled with inert gas.
* **Contact Material:** Usually Rhodium or Tungsten to resist "pitting" and "welding" during high-voltage arcing.
#### B. The Electromagnetic Coil
* **Function:** Wrapped around the reed switches, this creates the magnetic field required to pull the blades together.
* **Protection:** Often includes an internal **Flyback Diode** (in some "R" variants) to protect the driving circuit from inductive voltage spikes when the coil is de-energized.
#### C. Encapsulation (Potting)
* The entire assembly is molded in a high-dielectric epoxy resin. This prevents external arcing between pins and protects the delicate glass reed from mechanical shock.
---
### 3. Circuit Application Example
When integrating the HVS-2F-R, a typical drive circuit looks like this:
```python
# Simplified Logic for Controlling the Relay Coil
# (Assuming a Transistor/MOSFET Driver)
def toggle_high_voltage(state):
if state == "ON":
# Energize the coil (e.g., set GPIO High)
drive_pin.high()
print("Relay Closed: High Voltage Circuit Active")
else:
# De-energize the coil
drive_pin.low()
print("Relay Open: High Voltage Circuit Isolated")
```
---
### 4. Distinctive Features
* **High Isolation:** The "HVS" (High Voltage Series) designation indicates it can withstand several kilovolts between the coil and the contacts.
* **Compact Footprint:** Unlike large mechanical contactors, these are designed for direct soldering onto Printed Circuit Boards (PCBs).
* **Low Power Consumption:** The coil requires very little current to maintain the "Closed" state compared to traditional power relays.
- ⤷
What is the difference between Form A and Form B contacts in this relay?
- ⤷ How does the 'R' suffix affect the wiring of the coil?
- ⤷ What are the common failure modes for high-voltage reed relays?