FP1008-180-R
AI

## Technical Overview: FP1008-180-R
The **FP1008-180-R** is a high-frequency, high-current power inductor typically used in multi-phase voltage regulator modules (VRMs). It is manufactured by **Eaton (formerly Cooper Bussmann)** as part of their FP1008 series.
### 1. Key Specifications
The following table summarizes the primary electrical and physical characteristics of the component:
| Parameter | Value | Notes |
| :--- | :--- | :--- |
| **Inductance** | 180 nH (0.18 µH) | Measured at 0Adc |
| **Full Load Inductance** | 130 nH | Minimum value at $I_{sat}$ |
| **DC Resistance (DCR)** | 0.17 mΩ (±5%) | Extremely low for high efficiency |
| **Saturation Current ($I_{sat}$)** | 62 A | Current at which inductance drops ~20% |
| **RMS Current ($I_{rms}$)** | 85 A | Based on temperature rise (40°C) |
| **Operating Temp** | -40°C to +125°C | Includes self-heating |
| **Package Size** | 10.2 x 8.0 x 8.0 mm | Surface Mount (SMD) |
---
### 2. Core Features
* **High Frequency Performance:** Designed for switching frequencies up to **2 MHz**, making it ideal for modern high-speed power conversion.
* **Flat-Wire Construction:** Uses a flat-coil design to minimize DCR and maximize surface area for current flow, reducing power loss.
* **Ferrite Core Material:** Low core losses at high frequencies, though it features a sharper saturation curve compared to powdered iron cores.
* **Halogen Free & RoHS Compliant:** Meets environmental safety standards for modern electronics manufacturing.
---
### 3. Common Applications
This specific inductor is engineered for high-current power supplies where space is limited and efficiency is critical. Typical use cases include:
1. **Server & Desktop CPUs:** Voltage Regulator Modules (VRMs) and EVRDs.
2. **Graphics Cards (GPUs):** High-current power stages for high-end gaming and AI processing.
3. **Data Centers:** Point-of-Load (POL) converters.
4. **Networking:** High-speed routers and switches requiring stable power rails.
---
### 4. Part Number Breakdown
The nomenclature for this series follows a specific logic:
* **FP1008:** The series designation and physical dimensions (approx. 10mm x 8mm).
* **180:** The inductance value in nanohenries (180nH).
* **-R:** Indicates the part is RoHS compliant.
---
- ⤷
What are the cooling requirements for the FP1008-180-R when operating at peak current?
- ⤷ How does the saturation curve of this ferrite inductor compare to a composite core inductor?
- ⤷ Can this inductor be used in a series or parallel configuration for higher power output?