CTML1206-R22K
AI

The **CTML1206-R22K** is a specific type of passive electronic component, specifically a **Multi-Layer Chip Inductor**. Below is a detailed breakdown of its specifications, naming convention, and technical characteristics.
---
## 1. Technical Specifications
This component is designed for surface-mount technology (SMT) and is commonly used in high-frequency circuits and power management modules.
| Parameter | Value / Specification |
| :--- | :--- |
| **Component Type** | Multi-Layer Ferrite Chip Inductor |
| **Inductance** | 0.22 µH (Microhenries) |
| **Tolerance** | ±10% (Indicated by 'K') |
| **Case Size (EIA)** | 1206 |
| **Case Size (Metric)** | 3216 (3.2mm x 1.6mm) |
| **Material** | Ferrite Core |
| **Termination** | Sn (Tin) over Ni (Nickel) |
---
## 2. Part Number Deciphering
To understand the part, we can break down the alphanumeric code:
* **CTML**: Series Prefix (Ceramic/Multi-layer Inductor).
* **1206**: The physical dimensions of the package ($1.2 \times 0.06$ inches).
* **R22**: The Inductance value. The "R" acts as a decimal point. $R22 = 0.22 \text{ µH}$.
* **K**: The tolerance code. $K = \pm10\%$. (Common alternatives are J for $\pm5\%$ or M for $\pm20\%$).
---
## 3. Key Electronic Characteristics
### Magnetic Shielding
Because it is a multi-layer ferrite construction, the inductor is **self-shielded**. This means it has low magnetic leakage, reducing electromagnetic interference (EMI) with neighboring components on a dense PCB.
### Quality Factor (Q)
These inductors are designed to provide a high "Q" factor at specific frequencies, ensuring low signal loss in resonant circuits.
### Application Use-Cases
1. **Filtering**: Used in DC-to-DC converters to smooth out ripples.
2. **RF Circuits**: Used for impedance matching and signal decoupling in high-frequency communication devices.
3. **Noise Suppression**: Acting as a low-pass filter to block high-frequency noise in consumer electronics (laptops, smartphones).
---
## 4. Physical Dimensions (1206 Package)
The "1206" footprint is a standard size in the electronics industry:
```text
Length (L): 3.2mm ± 0.2mm
Width (W): 1.6mm ± 0.2mm
Height (H): 1.1mm (Typical)
```
- ⤷
What is the maximum current rating (Irms) for the CTML1206-R22K?
- ⤷ How does the ferrite core material affect the self-resonant frequency (SRF)?
- ⤷ What are the common alternatives to the 1206 package size for this inductance value?