поискавой системы для электроныых деталей
  Russian  ▼
ALLDATASHEETRU.COM

X  

  • CA-RSPNMCN19

  • AI
    The **CA-RSPNMCN19** is a high-performance RF (Radio Frequency) adapter cable assembly primarily used to connect wireless networking equipment to external antennas. This specific part is frequently associated with brands like **Cradlepoint** and is designed for low-signal loss at high frequencies. --- ### 1. Component Specifications The technical makeup of the CA-RSPNMCN19 is defined by its connectors and the quality of the coaxial cabling used. | Feature | Specification | | :--- | :--- | | **Cable Type** | LMR-195 (or equivalent low-loss coaxial) | | **Connector A** | RP-SMA Male (Reverse Polarity SMA) | | **Connector B** | N-Type Male | | **Length** | Typically 19 inches (approx. 50 cm) | | **Impedance** | 50 Ohms | | **Frequency Range** | 0 GHz to 6 GHz (Supports Wi-Fi 6 & 5G) | --- ### 2. Detailed Electronic Parts Breakdown #### A. RP-SMA Male Connector * **The Interface:** Unlike a standard SMA, the "Reverse Polarity" means the center pin is found on the female side, and the hole is on the male side. * **Material:** Usually gold-plated brass for superior conductivity and corrosion resistance. * **Purpose:** This end typically connects to the wireless router or access point (e.g., a Cradlepoint IBR series). #### B. N-Type Male Connector * **The Interface:** A much larger, threaded, rugged connector. * **Material:** Usually nickel or tri-metal plated. * **Purpose:** This is the standard interface for high-gain outdoor antennas or lightning arrestors. It is designed to be weather-resistant and durable. #### C. LMR-195 Coaxial Cable * **Conductor:** Solid bare copper. * **Dielectric:** Foam Polyethylene (PE) which provides low attenuation. * **Shielding:** Double shielded (Tinned copper braid + Aluminum tape) to provide 100% RF shielding, ensuring minimal interference from external signals. --- ### 3. Application Use-Case The electronic assembly acts as a "pigtail" or bridge. Because outdoor antennas use thick, rigid cables with N-type connectors, they cannot plug directly into small routers. **Signal Flow:** `Router (RP-SMA Female Port) <--> CA-RSPNMCN19 <--> N-Type Female Cable/Antenna` --- ### 4. Signal Loss Characteristics (Estimated) At higher frequencies, all cables lose some signal strength (measured in dB). For a 19-inch LMR-195 cable: * **At 900 MHz:** ~0.15 dB loss * **At 2.4 GHz:** ~0.30 dB loss * **At 5.8 GHz:** ~0.45 dB loss
    ✨ Follow-up Questions
    • ⤷ What is the difference between SMA and RP-SMA in this cable?
    • ⤷ Can this cable be used for outdoor installations without extra protection?
    • ⤷ What are the advantages of LMR-195 over standard RG-58 cable?