ADM6348-42ARTZ-R7
AI

The **ADM6348-42ARTZ-R7** is a high-performance microprocessor supervisory circuit designed by Analog Devices. Its primary function is to monitor power supply levels and provide a reset signal to a processor when the voltage falls below a predefined threshold.
---
### ## Technical Specifications
| Parameter | Specification |
| :--- | :--- |
| **Threshold Voltage** | 4.2V (Typical) |
| **Reset Type** | Active-Low, Open-Drain |
| **Output Logic** | Active-Low |
| **Supply Voltage (Vcc)** | 1.0V to 5.5V |
| **Supply Current** | 7 µA (Typical) |
| **Reset Timeout Period** | 100 ms (Minimum) |
| **Package / Case** | SOT-23-3 |
| **Operating Temperature** | -40°C to +85°C |
---
### ## Key Features
1. **Low Power Consumption:** With a typical supply current of only 7 µA, it is ideal for battery-operated and portable electronics.
2. **Precision Monitoring:** It is factory-trimmed to monitor specific voltage rails (in this case, 4.2V) with high accuracy.
3. **Open-Drain Output:** The output is an open-drain configuration, meaning it requires an external pull-up resistor. This allows for "wired-OR" logic or interfacing with different logic voltage levels.
4. **Glitch Immunity:** The device is designed to ignore fast transients on the Vcc line, preventing accidental system resets.
---
### ## Pin Configuration
| Pin Number | Name | Function |
| :--- | :--- | :--- |
| 1 | **GND** | Ground reference. |
| 2 | **RESET** | Active-low output. Asserts when Vcc < Threshold. |
| 3 | **Vcc** | Supply voltage and monitored input. |
---
### ## Typical Application Circuit
In a standard circuit, the ADM6348 monitors the 5V or 4.5V rail of a microcontroller (MCU). If the voltage drops below 4.2V, the `RESET` pin pulls low, holding the MCU in reset until the power stabilizes.
```markdown
Vcc (5V Rail) ----+----[ Vcc Pin ]
|
[Pull-up Resistor]
|
MCU Reset Pin <---+----[ RESET Pin ]
|
GND --------------+----[ GND Pin ]
```
---
### ## Ordering Information Breakdown
* **ADM6348**: Part Series (Microprocessor Supervisory Circuit).
* **42**: Voltage Threshold (4.2V).
* **ARTZ**: Package code (SOT-23) and Lead-free designation.
* **R7**: Packaging Type (7-inch Tape and Reel, 3,000 pieces).
- ⤷
What is the difference between an open-drain and a push-pull reset output in these circuits?
- ⤷ How does the reset timeout period affect system startup?
- ⤷ Can this device be used to monitor a 3.3V rail?