1008F-R68K
AI

The part number **1008F-R68K** refers to a specific type of surface-mount electronic component, specifically a **Wirewound Chip Inductor**.
---
## 1. Part Number Breakdown
To understand the specifications, we can decode the alphanumeric string based on industry standards for inductors:
| Segment | Meaning | Detail |
| :--- | :--- | :--- |
| **1008** | **Package Size** | Dimensions in inches (approx. 2.5mm x 2.0mm). |
| **F** | **Series/Type** | Ferrite core (typically used for higher inductance/current). |
| **R68** | **Inductance Value** | **0.68 µH** (Microhenries). |
| **K** | **Tolerance** | **±10%** variation from nominal value. |
---
## 2. Technical Specifications
While exact specifications can vary slightly between manufacturers (like Gowanda, API Delevan, or Coilcraft), the standard characteristics for a 1008F-R68K are:
### Electrical Properties
* **Inductance:** 0.68 µH.
* **Tolerance:** ±10%.
* **Core Material:** Ferrite (provides a high Q factor and high SRF).
* **Self-Resonant Frequency (SRF):** Usually in the range of 100 MHz to 500 MHz.
* **DC Resistance (DCR):** Low resistance to minimize power loss.
* **Current Rating:** Capable of handling moderate DC current (typically 300mA to 800mA depending on the specific series).
---
## 3. Physical Construction
The **1008F** is a "Wirewound" inductor, meaning it consists of:
1. **Core:** A ceramic or ferrite rectangular block.
2. **Wire:** Fine copper wire wrapped around the core.
3. **Terminations:** Metallic end caps (usually Tin over Nickel) for soldering to a PCB.
4. **Encapsulation:** Often coated with epoxy or molded for physical protection and pick-and-place machine compatibility.
---
## 4. Typical Applications
These components are widely used in high-frequency circuits where small size and high reliability are required:
* **RF Tuning:** Used in radio frequency circuits for filtering and impedance matching.
* **Signal Conditioning:** Decoupling and noise suppression in communication devices.
* **Mobile Electronics:** Smartphones, tablets, and wearables due to the compact 1008 footprint.
* **Power Management:** Small-scale DC-DC converters.
---
- ⤷
What is the difference between a ferrite core and a ceramic core in 1008 inductors?
- ⤷ How do I calculate the SRF requirements for my circuit?
- ⤷ Can this part be substituted with a 1008CS-R68K?