0603CS-R21XGLW
AI

The part number **0603CS-R21XGLW** refers to a high-frequency, wirewound ceramic chip inductor manufactured by **Coilcraft**. This specific component is part of the 0603CS series, widely used in RF (Radio Frequency) applications.
---
### 1. Part Number Breakdown
Understanding the nomenclature helps identify the specific technical characteristics of the component:
| Segment | Code | Meaning |
| :--- | :--- | :--- |
| **Series** | 0603CS | 0603 Package size (1.6 x 0.8 mm), Wirewound Ceramic Core |
| **Inductance** | R21 | 210 nH (R denotes decimal point in microhenries) |
| **Tolerance** | X | Historically used for special specs, but typically ±2% or ±5% in this series |
| **Termination** | G | Gold-plated terminations (RoHS compliant) |
| **Testing** | L | Standard testing |
| **Packaging** | W | 7″ machine-ready embossed tape (plastic carrier) |
---
### 2. Key Technical Specifications
The 0603CS series is known for its exceptionally high Q-factors and resonant frequencies.
| Parameter | Value |
| :--- | :--- |
| **Inductance** | 210 nH |
| **Tolerance** | ±2% (Common for 'G'/'X' variants in this range) |
| **Quality Factor (Q) min** | 28 at 100 MHz |
| **SRF (Self Resonant Freq)** | 1430 MHz (Typical) |
| **DCR (Max DC Resistance)** | 1.10 Ohms |
| **Irms (Max DC Current)** | 250 mA |
| **Operating Temperature** | -40°C to +125°C |
---
### 3. Physical Characteristics
* **Core Material:** Ceramic. Unlike ferrite cores, ceramic cores do not saturate, providing excellent stability across varying currents.
* **Construction:** Wirewound. This involves wrapping a fine copper wire around a ceramic body, which allows for much higher Q-factors compared to multilayer inductors.
* **Size:** 0603 Imperial (1608 Metric). Dimensions are approximately **1.6 x 0.8 x 0.8 mm**.
---
### 4. Typical Applications
Because of its high SRF and Q-factor, this inductor is primarily used in:
1. **Impedance Matching:** Tuning circuits for antennas in mobile phones or Wi-Fi modules.
2. **Filter Networks:** Used in Band-pass or Low-pass filters for RF signals.
3. **VCOs:** Voltage Controlled Oscillators requiring high stability.
4. **RF Chokes:** Decoupling high-frequency noise from DC power lines.
---
### 5. Equivalent/Alternative Search
If this specific Coilcraft part is unavailable, engineers often look at the following series for equivalents:
* **Murata:** LQW18A Series
* **TDK:** MHQ1608P Series
* **Taiyo Yuden:** AQ Series
- ⤷What is the difference between a wirewound ceramic inductor and a multilayer inductor?
- ⤷ How does the Q-factor affect RF circuit performance?
- ⤷ Can I substitute a 5% tolerance inductor for this 2% part in an antenna circuit?