MPXM2102AS datasheet(166/670 Pages) MOTOROLA

166 / 670 page

MPX12 SERIES

3–20

Motorola Sensor Device Data

www.motorola.com/semiconductors

MAXIMUM RATINGS(NOTE)

Rating

Symbol

Value

Unit

Maximum Pressure (P1 > P2)

Pmax

kPa

Burst Pressure (P1 > P2)

Pburst

100

kPa

Storage Temperature

Tstg

– 40 to +125

°C

Operating Temperature

– 40 to +125

°C

NOTE: Exposure beyond the specified limits may cause permanent damage or degradation to the device.

OPERATING CHARACTERISTICS (VS = 3.0 Vdc, TA = 25°C unless otherwise noted, P1 > P2)

Characteristic

Symbol

Min

Typ

Max

Unit

Differential Pressure Range(1)

POP

—

kPa

Supply Voltage(2)

—

3.0

6.0

Vdc

Supply Current

—

6.0

—

mAdc

Full Scale Span(3)

VFSS

Offset(4)

Voff

Sensitivity

∆V/∆P

—

5.5

—

mV/kPa

Linearity(5)

—

–0.5

—

5.0

%VFSS

Pressure Hysteresis(5) (0 to 10 kPa)

—

± 0.1

—

%VFSS

Temperature Hysteresis(5) (– 40

°C to +125°C)

—

± 0.5

—

%VFSS

Temperature Coefficient of Full Scale Span(5)

TCVFSS

– 0.22

—

– 0.16

%VFSS/°C

Temperature Coefficient of Offset(5)

TCVoff

—

±15

—

µV/°C

Temperature Coefficient of Resistance(5)

TCR

0.28

—

0.34

%Zin/°C

Input Impedance

Zin

400

—

550

Ω

Output Impedance

Zout

750

—

1250

Ω

Response Time(6) (10% to 90%)

—

1.0

—

Warm–Up Time(7)

—

Offset Stability(8)

—

±0.5

—

%VFSS

NOTES:

1. 1.0 kPa (kiloPascal) equals 0.145 psi.

2. Device is ratiometric within this specified excitation range. Operating the device above the specified excitation range may induce additional

error due to device self–heating.

3. Full Scale Span (VFSS) is defined as the algebraic difference between the output voltage at full rated pressure and the output voltage at the

minimum rated pressure.

4. Offset (Voff) is defined as the output voltage at the minimum rated pressure.

5. Accuracy (error budget) consists of the following:

• Linearity:

Output deviation from a straight line relationship with pressure, using end point method, over the specified

pressure range.

• Temperature Hysteresis: Output deviation at any temperature within the operating temperature range, after the temperature is

cycled to and from the minimum or maximum operating temperature points, with zero differential pressure

applied.

• Pressure Hysteresis:

Output deviation at any pressure within the specified range, when this pressure is cycled to and from the

minimum or maximum rated pressure, at 25

°C.

• TcSpan:

Output deviation at full rated pressure over the temperature range of 0 to 85

°C, relative to 25°C.

• TcOffset:

Output deviation with minimum rated pressure applied, over the temperature range of 0 to 85

°C, relative

to 25

°C.

• TCR:

Zin deviation with minimum rated pressure applied, over the temperature range of – 40°C to +125°C,

relative to 25

°C.

6. Response Time is defined as the time for the incremental change in the output to go from 10% to 90% of its final value when subjected to

a specified step change in pressure.

7. Warm–up Time is defined as the time required for the product to meet the specified output voltage after the pressure has been stabilized.

8. Offset Stability is the product’s output deviation when subjected to 1000 hours of Pulsed Pressure, Temperature Cycling with Bias Test.

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

MPXM2102AS датащи(PDF) 166 Page - Motorola, Inc

MPXM2102AS датащи(HTML) 166 Page - Motorola, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL