STM8AL3136 datasheet(121/124 Pages) STMICROELECTRONICS

121 / 124 page

DocID18474 Rev 7

121/124

STM8AL313x/4x/6x STM8AL3L4x/6x

Revision history

123

Revision history

Table 69. Document revision history

Date

Revision

Changes

04-Jan-2012

Initial release

20-Dec-2012

Added consumption values when run from Flash or from RAM.

Added 8k Flash devices STM8AL3138 and STM8AL3136 to Table 1:

Device summary, Table 2: Medium-density STM8AL313x/4x/6x and

STM8AL3L4x/6x low-power device features and peripheral counts. and

Figure 50: Medium-density STM8AL313x/4x/6x and STM8AL3L4x/6x

ordering information scheme1.

Added footnotes stating that power consumption has not been tested to

Table 21 and Table 22 for HSE, and to Table 23 and Table 24 for LSE.

Updated max LSI amperage values in Table 23 and Table 24.

Replaced Table 38: Flash program memory and Table 39: Data

memory.

Added a production test footnote to Table 50: TS characteristics.

Updated voltage values in Table 50: TS characteristics, and current

values in Table 51: Comparator 1 characteristics and Table 52:

Comparator 2 characteristics.

Removed Figure 13: Typ. IDD(LPR) vs. VDD (LSI clock source) and

Figure 14: Typ. IDD(LPW) vs. VDD (LSI clock source).

03-Jun-2013

Updated ‘Qualification conforms’ bullet on cover page.

Updated ‘TS_Factory_CONV’ in Figure 9: Memory map

Removed ‘rev G’ in Table 18: Operating lifetime (OLF) Ratings

Replaced 0.40 by 0.38 in Table 22: Total current consumption in Wait

mode ‘code executed from Flash’ fcpu = 125 kHz

Updated footnote (3) in Table 23: Total current consumption and timing

in low-power run mode at VDD =1.65 V to 3.6 V, Table 24: Total current

consumption in low-power wait mode at VDD = 1.65 V to 3.6 V and

Table 27: Total current consumption and timing in Halt mode at VDD =

1.65 to 3.6 V

Updated footnote (2) in Table 26: Typical current consumption in Active-

halt mode, RTC clocked by LSE external crystal

Updated max lLEAK_HSE in Table 30: HSE external clock

characteristics and Table 31: LSE external clock characteristics

Updated ACCHSI in Table 34: HSI oscillator characteristics

Updated tprog max Table 38: Flash program memory

Updated STABVREFINT in Table 49: Reference voltage characteristics

Updated ‘TS_Factory_CONV’ in Table 50: TS characteristics footnote.

Updated ‘tconv’ and ‘title’ in Table 56: ADC1 characteristics

Updated title in Table 57: ADC1 accuracy with VDDA = 2.5 V to 3.3 V

Updated Table 64: Electrical sensitivities

14-Jun-2013

Updated max LSI measures in Table 23: Total current consumption and

timing in low-power run mode at VDD =1.65 V to 3.6 V and Table 24:

Total current consumption in low-power wait mode at VDD = 1.65 V to

3.6 V

STM8AL3136 датащи(PDF) 121 Page - STMicroelectronics

STM8AL3136 датащи(HTML) 121 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL