Page 8

MK-Q-B-P-D-050610-01-9

DSC1001

1.8~3.3V

Low-Power Precision CMOS Oscillator

2.5 x 2.0 mm Plastic Package

Ordering Information

DSC1001 PTS – xxx.xxxx T

PART NUMBERING GUIDE

Package

(Plastic QFN)

Temperature

Stability

Frequency

Packing Option

P=A: 7.0x5.0mm

P=B: 5.0x3.2mm

P=C: 3.2x2.5mm

P=D: 2.5x2.0mm

S=1: ±50ppm

S=2: ±25ppm

S=5: ±10ppm

XXX.XXXX

Blank: Tubes

-

T: Tape & Reel

Example: DSC1001CE1–123.0000T

The example part number above is a 123.0000MHz oscillator in Plastic 3.2x2.5mm package, with ±50ppm

Disclaimer:

Micrel makes no representations or warranties with respect to the accuracy or completeness of the information furnished in this data sheet. This information is not intended as a

warranty and Micrel does not assume responsibility for its use. Micrel reserves the right to change circuitry, specifications and descriptions at any time without notice. No

license, whether express, implied, arising by estoppel or otherwise, to any intellectual property rights is granted by this document.

Except as provided in Micrel’s terms and

conditions of sale for such products, Micrel assumes no liability whatsoever, and Micrel disclaims any express or implied warranty relating to the sale and/or use of Micrel

products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right.

Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be

expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life,

and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s use or sale of Micrel Products for use in life support

appliances, devices or systems is a Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale.

MICREL, Inc.

●

2180 Fortune Drive,

San Jose, California

95131

●

USA

Phone: +1 (408) 944-0800

●

Fax: +1 (408) 474-1000

● Email: hbwhelp@micrel.com

●

www.micrel.com

Pin Terminal

VDD

Standby#

Output

GND

0.85±0.05 [0.033±0.002]

Recommended Land Pattern

#1

#2

#3

#4

2.5±0.05 [0.098±0.002]

2.0±0.05 [0.079±0.002]

#4

#3

#2

#1

0.65±0.10 [0.026±0.004]

0.65±0.05 [0.026±0.002]

CO.25

0.85 [0.033]

0.65 [0.026]

0.7 [0.028]

1.65 [0.065]

No

.

4

1

3

2

0.7 [0.028]

1.65 [0.065]

External Dimensions

units: mm [inch]

0.2 [0.008]