| поискавой системы для электроныых деталей |
|
64GA106 датащи(PDF) 225 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
64GA106 датащи(HTML) 225 Page - Microchip Technology |
|
225 / 330 page ![]() 2010 Microchip Technology Inc. DS39905E-page 225 PIC24FJ256GA110 FAMILY 21.0 10-BIT HIGH-SPEED A/D CONVERTER The 10-bit A/D Converter has the following key features: • Successive Approximation (SAR) Conversion • Conversion Speeds of up to 500 ksps • 16 Analog Input pins • External Voltage Reference Input pins • Internal Band Gap Reference Inputs • Automatic Channel Scan mode • Selectable Conversion Trigger Source • 16-Word Conversion Result Buffer • Selectable Buffer Fill modes • Four Result Alignment Options • Operation during CPU Sleep and Idle modes On all PIC24FJ256GA110 family devices, the 10-bit A/D Converter has 16 analog input pins, designated AN0 through AN15. In addition, there are two analog input pins for external voltage reference connections (VREF+ and VREF-). These voltage reference inputs may be shared with other analog input pins. A block diagram of the A/D Converter is shown in Figure 21-1. To perform an A/D conversion: 1. Configure the A/D module: a) Configure port pins as analog inputs and/or select band gap reference input (AD1PCFGL<15:0> and AD1PCFGH<1:0>). b) Select voltage reference source to match expected range on analog inputs (AD1CON2<15:13>). c) Select the analog conversion clock to match the desired data rate with the processor clock (AD1CON3<7:0>). d) Select the appropriate sample/conversion sequence (AD1CON1<7:5> and AD1CON3<12:8>). e) Select how conversion results are presented in the buffer (AD1CON1<9:8>). f) Select interrupt rate (AD1CON2<5:2>). g) Turn on A/D module (AD1CON1<15>). 2. Configure the A/D interrupt (if required): a) Clear the AD1IF bit. b) Select A/D interrupt priority. Note: This data sheet summarizes the features of this group of PIC24F devices. It is not intended to be a comprehensive reference source. For more information, refer to the “PIC24F Family Reference Manual” , Section 17. “10-Bit A/D Converter” (DS39705). |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |