| поискавой системы для электроныых деталей |
|
WM8321 датащи(PDF) 115 Page - Wolfson Microelectronics plc |
|
|
|||||||||||||||||||||||||||||
WM8321 датащи(HTML) 115 Page - Wolfson Microelectronics plc |
|
115 / 253 page ![]() Production Data WM8321 w PD, February 2012, Rev 4.0 115 22 SYSTEM STATUS LED DRIVERS 22.1 GENERAL DESCRIPTION The WM8321 provides two System Status LED Drivers. These are digital outputs intended for driving LEDs directly. The LED outputs can be assigned to indicate OTP Program status or Power State status. They can also be commanded directly via register control, in order to provide any other required functionality. 22.2 LED DRIVER CONTROL LED Drivers are configurable in the ON and SLEEP power states only. The functionality of the LED Drivers is controlled by the LEDn_SRC register bits, as described in Table 59. ADDRESS BIT LABEL DEFAULT DESCRIPTION R16460 (404Ch) Status LED1 15:14 LED1_SRC [1:0] 11 LED1 Source (Selects the LED1 function.) 00 = Off 01 = Power State Status 10 = Reserved 11 = Manual Mode Note - LED1 also indicates completion of OTP Auto Program R16461 (404Dh) Status LED2 15:14 LED2_SRC [1:0] 11 LED2 Source (Selects the LED2 function.) 00 = Off 01 = Power State Status 10 = Reserved 11 = Manual Mode Note - LED2 also indicates an OTP Auto Progam Error condition Table 59 System Status LED Control 22.2.1 OTP PROGAM STATUS The LED drivers indicate the status of the OTP Auto Program function, where the contents of the external InstantConfig™ EEPROM (ICE) memory are automatically programmed into the OTP. See Section 14.6.3 for further details of the OTP Auto Program function. When the OTP Auto Program function is executed, the System Status LED drivers follow the functionality defined in Table 60. LED DRIVER DESCRIPTION DRIVE MODE LED ‘ON’ TIME ON:OFF DUTY CYCLE LED1 OTP Auto Program Complete Constant n/a n/a LED2 OTP Auto Progam Error Constant n/a n/a Table 60 System Status LED Outputs - OTP Program Status The OTP Program Status LED outputs will continue until a Device Reset. Note that the OTP Program Status is always indicated via the LED outputs, regardless of the LEDn_SRC register fields. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |