 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
TMP86FS49AIUG датащи(PDF) 156 Page - Toshiba Semiconductor |
|
|
|||||||||||||||||||||||||||||
TMP86FS49AIUG датащи(HTML) 156 Page - Toshiba Semiconductor |
|
|
156 / 296 page  Page 140 12. Asynchronous Serial interface (UART1 ) 12.2 Control TMP86FS49AIUG 12.2 Control UART1 is controlled by the UART1 Control Registers (UART1CR1, UART1CR2). The operating status can be monitored using the UART status register (UART1SR). Note 1: When operations are disabled by setting TXE and RXE bit to “0”, the setting becomes valid when data transmit or receive complete. When the transmit data is stored in the transmit data buffer, the data are not transmitted. Even if data transmit is enabled, until new data are written to the transmit data buffer, the current data are not transmitted. Note 2: The transmit clock and the parity are common to transmit and receive. Note 3: UART1CR1<RXE> and UART1CR1<TXE> should be set to “0” before UART1CR1<BRG> is changed. Note: When UART1CR2<RXDNC> = “01”, pulses longer than 96/fc [s] are always regarded as signals; when UART1CR2<RXDNC> = “10”, longer than 192/fc [s]; and when UART1CR2<RXDNC> = “11”, longer than 384/fc [s]. UART1 Control Register1 UART1CR1 (0F95H) 76 543 210 TXE RXE STBT EVEN PE BRG (Initial value: 0000 0000) TXE Transfer operation 0: 1: Disable Enable Write only RXE Receive operation 0: 1: Disable Enable STBT Transmit stop bit length 0: 1: 1 bit 2 bits EVEN Even-numbered parity 0: 1: Odd-numbered parity Even-numbered parity PE Parity addition 0: 1: No parity Parity BRG Transmit clock select 000: 001: 010: 011: 100: 101: 110: 111: fc/13 [Hz] fc/26 fc/52 fc/104 fc/208 fc/416 TC3 ( Input INTTC3) fc/96 UART1 Control Register2 UART1CR2 (0F96H) 765 432 1 0 RXDNC STOPBR (Initial value: **** *000) RXDNC Selection of RXD input noise rejectio time 00: 01: 10: 11: No noise rejection (Hysteresis input) Rejects pulses shorter than 31/fc [s] as noise Rejects pulses shorter than 63/fc [s] as noise Rejects pulses shorter than 127/fc [s] as noise Write only STOPBR Receive stop bit length 0: 1: 1 bit 2 bits |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
