12F615 datasheet(129/168 Pages) MICROCHIP

129 / 168 page

Preliminary

DS41302A-page 127

PIC12F609/615/12HV609/615

15.0

ELECTRICAL SPECIFICATIONS

Absolute Maximum Ratings(†)

Ambient temperature under bias..........................................................................................................-40° to +125°C

Storage temperature ........................................................................................................................ -65°C to +150°C

Voltage on VDD with respect to VSS ................................................................................................... -0.3V to +6.5V

Voltage on MCLR with respect to Vss ............................................................................................... -0.3V to +13.5V

Voltage on all other pins with respect to VSS ........................................................................... -0.3V to (VDD + 0.3V)

Total power dissipation(1) ............................................................................................................................... 800 mW

Maximum current out of VSS pin ...................................................................................................................... 95 mA

Maximum current into VDD pin ......................................................................................................................... 95 mA

Input clamp current, IIK (VI < 0 or VI > VDD)

...............................................................................................................± 20 mA

Output clamp current, IOK (Vo < 0 or Vo >VDD)

.........................................................................................................± 20 mA

Maximum output current sunk by any I/O pin.................................................................................................... 25 mA

Maximum output current sourced by any I/O pin .............................................................................................. 25 mA

Maximum current sunk by GPIO ...................................................................................................................... 90 mA

Maximum current sourced GPIO...................................................................................................................... 90 mA

Note 1:

Power dissipation is calculated as follows: PDIS = VDD x {IDD –

∑ IOH} + ∑ {(VDD – VOH) x IOH} + ∑(VOl x IOL).

† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the

device. This is a stress rating only and functional operation of the device at those or any other conditions above those

indicated in the operation listings of this specification is not implied. Exposure above maximum rating conditions for

extended periods may affect device reliability.

12F615 датащи(PDF) 129 Page - Microchip Technology

12F615 датащи(HTML) 129 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL