| поискавой системы для электроныых деталей |
|
SIM800 датащи(PDF) 364 Page - SIMCom |
|
|
|||||||||||||||||||||||||||||
SIM800 датащи(HTML) 364 Page - SIMCom |
|
364 / 380 page ![]() Smart Machine Smart Decision SIM800 Series_AT Command Manual_V1.09 364 2015-08-03 The peak throughput class The mean throughput class And is decided in "requested QOS” and "minimum acceptable QOS”. All parameters of the QOS are initiated by default value (=0) except the reliability class is 3. To define a QOS use the AT+CGQREQ or AT+CGQMIN Command. Overwrite the precedence class of QOS of CID 1 and sets the QOS of CID 1 to be present AT+CGQREQ=1,0,0,3 ,0,0 OK Response: all QOS values of the activated CID. AT+CGQREQ? +CGQREQ: 1,0,0,3,0,0 +CGQREQ: 2,0,0,3,0,0 +CGQREQ: 3,0,0,3,0,0 OK Set the QOS of CID 1 to not present. Once defined, the CID can be activated. AT+CGQREQ=1 OK Activate CID 1, if the CID is already active, the mobile returns OK at once. If no CID is defined the mobile responds +CME ERROR: invalid index. Note: If the mobile is NOT attached by AT+CGATT=1 before activating, the attachment is automatically done by the AT+CGACT Command. AT+CGACT=1,1 AT+CGACT=1,3 OK +CME ERROR: requested service option not subscribed. Use the defined and activated CID to get online. The mobile can be connected using the parameters of appointed CID or using default parameter AT+CGDATA="PPP", 1 CONNECT The mobile supports Layer 2 Protocol (L2P) PPP only. Note: If the mobile is NOT attached by AT+CGATT=1 and the CID is NOT activated before connecting, attaching and activating is automatically done by the AT+CGDATA Command. Some providers require using an APN to establish a GPRS connection. So if user uses the Microsoft Windows Dial-Up Network and ATD*9… to connect to GPRS, user must provide the context definition as part of the modem definition (Modem properties/Connection/Advanced… /Extra settings.) As an alternative, user can define and activate the context in a terminal program (e.g. Microsoft HyperTerminal) and then use the Dial-Up Network to send only the ATD Command. 20.9 TCPIP Commands Please refer to SIM800 Series_TCPIP_Application Note.doc |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |