SIM800 datasheet(245/380 Pages) SIMCOM

245 / 380 page

Smart Machine Smart Decision

SIM800 Series_AT Command Manual_V1.09

245

2015-08-03

Disable getting data from network manually, the module is

set to normal mode, data will be pushed to TE directly.

Enable getting data from network manually.

The module can get data, but the length of output data can

not exceed 1460 bytes at a time.

Similar to mode 2, but in HEX mode, which means the

module can get 730 bytes maximum at a time.

Query how many data are not read with a given ID.

<id>

A numeric parameter which indicates the connection number

<reqlength> Requested number of data bytes (1-1460 bytes)to be read

<cnflength> Confirmed number of data bytes to be read, which may be less

than <length>. 0 indicates that no data can be read.

Parameter Saving

Mode

NO_SAVE

Max

Response

Time

Reference

Note

To enable this function, parameter <mode> must be set to 1 before

connection.

8.2.27 AT+CIPSCONT

Save TCPIP Application Context

AT+CIPSCONT

Save TCPIP Application Context

Read Command

AT+CIPSCONT

Response

TA returns TCPIP Application Context, which consists of the following

AT Command parameters.

+CIPSCONT: <mode0>

+CIPCSGP: <mode>

Gprs Config APN: <apn>

Gprs Config UserId: <user name>

Gprs Config Password: <password>

+CIPHEAD: <mode>

+CIPSHOWTP: <mode>

+CIPSRIP: <mode>

+CIPATS: <mode>,<time>

+CIPSPRT: <send prompt>,<notshowsendok>

+CIPQSEND: <n>

+CIPMODE: <mode>

+CIPCCFG:

<NmRetry>,<WaitTm>,<SendSz>,<esc>,<Rxmode>,<RxSize>,<Rxti

mer>

+CIPMUX: <n>

SIM800 датащи(PDF) 245 Page - SIMCom

SIM800 датащи(HTML) 245 Page - SIMCom

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL