| поискавой системы для электроныых деталей |
|
ST72344 датащи(PDF) 156 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST72344 датащи(HTML) 156 Page - STMicroelectronics |
|
156 / 191 page ![]() ST72340, ST72344, ST72345 156/191 13.4 PLL CHARACTERISTICS Note: 1. To obtain a x4 multiplication ratio in the range 3.3 to 5.5V, the DIV2EN option bit must enabled. 2. Guaranteed by design. 13.4.1 Internal RC Oscillator and PLL The ST7 internal clock can be supplied by an internal RC oscillator and PLL (selectable by option byte). 13.5 INTERNAL RC OSCILLATOR CHARACTERISTICS Notes: 1. If the RC oscillator clock is selected, to improve clock stability and frequency accuracy, it is recommended to place a decoupling capacitor, typically 100nF, between the VDD and VSS pins as close as possible to the ST7 device. 2. See “Internal RC Oscillator” on page 30 3. Expected results. Data based on characterization, not tested in production Symbol Parameter Conditions Min Typ Max Unit fPLLIN PLL Input frequency 2) VDD = 2.7 to 3.65V PLL option x4 selected 0.95 1 1.05 MHz VDD = 3.3 to 5.5V PLL option x8 selected 0.90 1 1.10 VDD(PLL) PLL operating range PLL option x4 selected 1) 2.7 3.65 V PLL option x8 selected 3.3 5.5 tw(JIT) PLL jitter period fRC = 1MHz 8 kHz JITPLL PLL jitter ( ∆f CPU/fCPU) VDD = 3.0V 3.0 % VDD = 5.0V 1.6 IDD(PLL) PLL current consumption TA=25°C 600 µA Symbol Parameter Conditions Min Typ Max Unit VDD(RC) Internal RC Oscillator operating voltage Refer to operating range of VDD with TA, Section 13.3.1 on page 154 2.7 5.5 V VDD(x4PLL) x4 PLL operating voltage 2.7 5.5 VDD(x8PLL) x8 PLL operating voltage 3.3 5.5 tSTARTUP PLL Startup time 60 PLL input clock (fPLL) cycles Symbol Parameter Conditions Min Typ Max Unit fRC Internal RC oscillator fre- quency 1) RCCR = FF (reset value), TA=25°C,VDD=5V 625 kHz RCCR = RCCR02 ),TA=25°C,VDD=5V 1000 ACCRC Accuracy of Internal RC oscillator with RCCR=RCCR02) TA=25°C,VDD=5V -1 +1 % TA=25°C, VDD=4.5 to 5.5V 3) -1 +1 % TA=25 to +85°C,VDD=5V 3) -3 +3 % TA=25 to +85°C,VDD=4.5 to 5.5V 3) -3.5 +3.5 % TA=-40 to +25°C,VDD=4.5 to 5.5V 3) -3 +7 % IDD(RC) RC oscillator current con- sumption TA=25°C,VDD=5V 6003) µA tsu(RC) RC oscillator setup time TA=25°C,VDD=5V 102) µs |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |