REYCONNS

SAW Resonator

R433.42

REYCONNS CHINA LIMITED

www.reyconns.com

Recommended Reflow Soldering Diagram

Notes

1. As a result of the particularity of inner structure of SAW products, it easy to be breakdown by

electrostatic, so we should pay attention to ESD protect in the test.

2. Static voltage between signal load and ground may cause deterioration and destruction of the

component. Please avoid static voltage.

3. Ultrasonic cleaning may cause deterioration and destruction of the component. Please avoid ultrasonic

cleaning.

4. Only leads of component may be soldered. Please avoid soldering another part of component.

5. There is a close relationship between the device's performance and matching network. The

specifications of this device are based on the test circuit shown above. L and C values may change

depending on board layout. Values shown are intended as a guide only.