PIC18F4520ESLASHMLQTP datasheet(107/390 Pages) MICROCHIP

107 / 390 page

 2004 Microchip Technology Inc.

Preliminary

DS39631A-page 105

PIC18F2420/2520/4420/4520

10.0

I/O PORTS

Depending on the device selected and features

enabled, there are up to five ports available. Some pins

of the I/O ports are multiplexed with an alternate

function from the peripheral features on the device. In

general, when a peripheral is enabled, that pin may not

be used as a general purpose I/O pin.

Each port has three registers for its operation. These

registers are:

• TRIS register (data direction register)

• PORT register (reads the levels on the pins of the

device)

• LAT register (output latch)

The Data Latch (LAT register) is useful for read-modify-

write operations on the value that the I/O pins are

driving.

A simplified model of a generic I/O port, without the

interfaces to other peripherals, is shown in Figure 10-1.

FIGURE 10-1:

GENERIC I/O PORT

OPERATION

10.1

PORTA, TRISA and LATA Registers

PORTA is a 8-bit wide, bidirectional port. The corre-

sponding data direction register is TRISA. Setting a

TRISA bit (= 1) will make the corresponding PORTA pin

an input (i.e., put the corresponding output driver in a

high-impedance mode). Clearing a TRISA bit (= 0) will

make the corresponding PORTA pin an output (i.e., put

the contents of the output latch on the selected pin).

Reading the PORTA register reads the status of the

pins, whereas writing to it, will write to the port latch.

The Data Latch (LATA) register is also memory mapped.

Read-modify-write operations on the LATA register read

and write the latched output value for PORTA.

The RA4 pin is multiplexed with the Timer0 module

clock input and one of the comparator outputs to

become the RA4/T0CKI/C1OUT pin. Pins RA6 and

RA7 are multiplexed with the main oscillator pins; they

are enabled as oscillator or I/O pins by the selection of

the main oscillator in the configuration register (see

Section 23.1 “Configuration Bits” for details). When

they are not used as port pins, RA6 and RA7 and their

associated TRIS and LAT bits are read as ‘0’.

The other PORTA pins are multiplexed with analog

inputs, the analog VREF+ and VREF- inputs and the com-

parator voltage reference output. The operation of pins

RA3:RA0 and RA5 as A/D converter inputs is selected

by clearing or setting the control bits in the ADCON1

Pins RA0 through RA5 may also be used as comparator

inputs or outputs by setting the appropriate bits in the

CMCON register. To use RA3:RA0 as digital inputs, it is

also necessary to turn off the comparators.

The RA4/T0CKI/C1OUT pin is a Schmitt Trigger input.

All other PORTA pins have TTL input levels and full

CMOS output drivers.

The TRISA register controls the direction of the PORTA

pins, even when they are being used as analog inputs.

The user must ensure the bits in the TRISA register are

maintained set when using them as analog inputs.

EXAMPLE 10-1:

INITIALIZING PORTA

Data

Bus

WR LAT

WR TRIS

RD Port

Data Latch

TRIS Latch

RD TRIS

Input

Buffer

I/O pin(1)

RD LAT

or Port

Note 1:

I/O pins have diode protection to VDD and VSS.

Note:

On a Power-on Reset, RA5 and RA3:RA0

are configured as analog inputs and read

as ‘0’. RA4 is configured as a digital input.

CLRF

PORTA

; Initialize PORTA by

; clearing output

; data latches

CLRF

LATA

; Alternate method

; to clear output

; data latches

MOVLW

07h

; Configure A/D

MOVWF

ADCON1

; for digital inputs

MOVWF

07h

; Configure comparators

MOVWF

CMCON

; for digital input

MOVLW

0CFh

; Value used to

; initialize data

; direction

MOVWF

TRISA

; Set RA<3:0> as inputs

; RA<5:4> as outputs

PIC18F4520E/MLQTP датащи(PDF) 107 Page - Microchip Technology

PIC18F4520E/MLQTP датащи(HTML) 107 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL