| производитель | номер детали | датащи | подробное описание детали |

PHOENIX CONTACT
|
PLC-BSC-5DC |
59Kb/4P |
6.2 mm PLC basic terminal block with screw connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 1 PDT, input voltage 5 V DC |

NXP Semiconductors
|
PESD1CAN215 |
97Kb/12P |
PESD1CAN in a small SOT23 (TO-236AB) Surface-Mounted Device (SMD) plastic package designed to protect two automotive Controller Area Network (CAN) bus lines from the damage caused by ElectroStatic Discharge (ESD) and other transients. Rev. 04-15 February 2008 |

PHOENIX CONTACT
|
PLC-BSC-24UC |
110Kb/9P |
14 mm PLC basic terminal block with screw connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 2 PDTs, input voltage 24 V AC/DC |
| PLC-BSC-230UC |
65Kb/4P |
14 mm PLC basic terminal block with screw connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 2 PDTs, input voltage 230 V AC/DC |
| PLC-BSP-48DC |
116Kb/9P |
6.2 mm PLC basic terminal block with spring-cage connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 1 PDT, input voltage 48 V DC |

WAGO Kontakttechnik Gmb...
|
781-992 |
599Kb/17P |
2-conductor through terminal block; 4 mm짼; suitable for Ex e II applications; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP짰; 4,00 mm짼; light gray 29.12.2021 |

PHOENIX CONTACT
|
PLC-BPT-24DC |
111Kb/9P |
14 mm PLC basic terminal block with push-in connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 2 PDTs, input voltage 24 V DC |
| PLC-BPT-5DC |
64Kb/3P |
6.2 mm PLC basic terminal block with push-in connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 1 PDT, input voltage 5 V DC |
| PLC-BPT-48DC |
58Kb/3P |
6.2 mm PLC basic terminal block with push-in connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 1 PDT, input voltage 48 V DC |

WAGO Kontakttechnik Gmb...
|
769-238-281-410 |
674Kb/11P |
1-conductor/1-pin component carrier terminal block; with diode 1N4007; anode, left side; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm짼; CAGE CLAMP짰; 4,00 mm짼; gray 29.12.2021 |
| 780-992 |
568Kb/16P |
2-conductor through terminal block; 2.5 mm짼; suitable for Ex e II applications; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP짰; 2,50 mm짼; light gray 29.12.2021 |

PHOENIX CONTACT
|
PLC-BPT-60DC |
58Kb/3P |
6.2 mm PLC basic terminal block with push-in connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 1 PDT, input voltage 60 V DC |
| PLC-BSP-12DC |
110Kb/9P |
14 mm PLC basic terminal block with spring-cage connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 2 PDTs, input voltage 12 V DC |
| PLC-BSP-60DC |
116Kb/9P |
6.2 mm PLC basic terminal block with spring-cage connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 1 PDT, input voltage 60 V DC |
| 2959793 |
83Kb/3P |
Side element with foot, however without PCB guide, labeling with SSZB, mounted along the length of the DIN rail NS 35/7.5. Height: 36 mm, width: 10 mm, length: 45 mm. |
| PLC-BSP-24UC |
109Kb/9P |
14 mm PLC basic terminal block with spring-cage connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 2 PDTs, input voltage 24 V AC/DC |
| PLC-BSP-120UC |
109Kb/9P |
14 mm PLC basic terminal block with spring-cage connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 2 PDTs, input voltage 120 V AC/DC |
| 2891053 |
46Kb/2P |
The FL DIN RA is installed in a standard, 19-inch rack (EIA-310-D, IEC 60297-3-100) to allow DIN rail mounted equipment to be rack mounted Why buy this product |

WAGO Kontakttechnik Gmb...
|
2002-6301 |
1Mb/25P |
3-conductor through terminal block; 2.5 mm짼; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Pushin CAGE CLAMP짰; 2,50 mm짼; gray 23.11.2021 |
| 2002-3228 |
815Kb/20P |
Triple-deck terminal block; Shield/through/through terminal block; 2.5 mm짼; Shielding/L/L; without marker carrier; for DIN-rail 35 x 15 and 35 x 7.5; Pushin CAGE CLAMP짰; 2,50 mm짼; gray 24.11.2021 |