| производитель | номер детали | датащи | подробное описание детали |
PHOENIX CONTACT
|
PLC-BSP-120UC |
109Kb/9P |
14 mm PLC basic terminal block with spring-cage connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 2 PDTs, input voltage 120 V AC/DC |
| 2891053 |
46Kb/2P |
The FL DIN RA is installed in a standard, 19-inch rack (EIA-310-D, IEC 60297-3-100) to allow DIN rail mounted equipment to be rack mounted Why buy this product |
WAGO Kontakttechnik Gmb...
|
2002-6301 |
1Mb/25P |
3-conductor through terminal block; 2.5 mm짼; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Pushin CAGE CLAMP짰; 2,50 mm짼; gray
23.11.2021 |
| 2002-3228 |
815Kb/20P |
Triple-deck terminal block; Shield/through/through terminal block; 2.5 mm짼; Shielding/L/L; without marker carrier; for DIN-rail 35 x 15 and 35 x 7.5; Pushin CAGE CLAMP짰; 2,50 mm짼; gray
24.11.2021 |
| 2206-1201 |
775Kb/15P |
2-conductor through terminal block; with push-button; 6 mm짼; with test port; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP짰; 6,00 mm짼; gray
24.11.2021 |
| 2206-1301 |
779Kb/15P |
3-conductor through terminal block; with push-button; 6 mm짼; with test port; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP짰; 6,00 mm짼; gray
24.11.2021 |
PHOENIX CONTACT
|
2297620 |
139Kb/5P |
The PROFIBUS module EM-PB-GATEWAY-IFS, certified as per DPV1 specification (EN 50170), connects up to 32 motor management modules (EMM-...IFS) or other INTERFACE system devices via the TBUS DIN rail connector. |
| PLC-BSP-24DC |
59Kb/4P |
14 mm PLC basic terminal block for high continuous currents with spring-cage connection, without relay or solidstate relay, for mounting on DIN rail NS 35/7,5, 1 PDT, input voltage 24 V DC |
WAGO Kontakttechnik Gmb...
|
2204-1401 |
817Kb/16P |
4-conductor through terminal block; with push-button; 4 mm짼; with test port; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP짰; 4,00 mm짼; gray
23.11.2021 |
| 2210-1301 |
716Kb/14P |
3-conductor through terminal block; with push-button; 10 mm짼; with test port; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP짰; 10,00 mm짼; gray
24.11.2021 |
| 2216-1201 |
755Kb/15P |
2-conductor through terminal block; with push-button; 16 mm짼; with test port; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP짰; 16,00 mm짼; gray
24.11.2021 |
| 2204-1301 |
822Kb/16P |
3-conductor through terminal block; with push-button; 4 mm짼; with test port; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP짰; 4,00 mm짼; gray
24.11.2021 |
| 2210-1201 |
724Kb/15P |
2-conductor through terminal block; with push-button; 10 mm짼; with test port; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP짰; 10,00 mm짼; gray
24.11.2021 |
| 2216-1301 |
754Kb/14P |
3-conductor through terminal block; with push-button; 16 mm짼; with test port; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP짰; 16,00 mm짼; gray
24.11.2021 |
| 2002-3258 |
810Kb/20P |
Triple-deck terminal block; Shield/through/through terminal block; 2.5 mm짼; Shielding/L/L; with marker carrier; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP짰; 2,50 mm짼; gray
24.11.2021 |
| 2202-1671 |
870Kb/18P |
2-conductor disconnect/test terminal block; with push-button; with test option; orange disconnect link; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm짼; Push-in CAGE CLAMP짰; 2,50 mm짼; gray
24.11.2021 |
| 2204-1201 |
828Kb/16P |
2-conductor through terminal block; with push-button; 4 mm짼; with test port; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP짰; 4,00 mm짼; gray
24.11.2021 |
| 2204-1207 |
790Kb/14P |
2-conductor ground terminal block; with push-button; 4 mm짼; with test port; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP짰; 4,00 mm짼; green-yellow
24.11.2021 |
| 769-218-281-410 |
697Kb/12P |
1-conductor/1-pin component carrier terminal block; with 2 jumper positions; with diode 1N4007; anode, left side; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm짼; CAGE CLAMP짰; 4,00 mm짼; gray
29.12.2021 |
| 769-218-281-411 |
735Kb/12P |
1-conductor/1-pin component carrier terminal block; with 2 jumper positions; with diode 1N4007; anode, right side; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm짼; CAGE CLAMP짰; 4,00 mm짼; gray
29.12.2021 |
Russian ▼ 
English
Chinese
German
Japanese
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
