| производитель | номер детали | датащи | подробное описание детали |

PHOENIX CONTACT
|
RIF-LDP-110DC |
63Kb/2P |
Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with freewheeling diode and yellow LED, polarity: A1+, A2-, input voltage: 110 V DC 짹20 % |
| RIF-LV-120-230AC |
63Kb/2P |
Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with varistor and yellow LED, input voltage: 120 ... 230 V AC/110 V DC 짹20 % |
| RIF-LDP-48-60DC |
63Kb/2P |
Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with freewheeling diode and yellow LED, polarity: A1+, A2-, input voltage: 48 ... 60 V DC 짹20 % |
| RIF-LDP-12-24DC |
48Kb/3P |
Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with freewheeling diode and yellow LED, polarity: A1+, A2-, input voltage: 12 - 24 V DC 짹20% |
| 2701295 |
66Kb/5P |
Axiocontrol for the direct control of Axioline I/Os. With 2 Ethernet interfaces, extended temperature range, and programming options according to IEC 61131-3. Complete with connector connector and marking field. |
| 2300818 |
77Kb/3P |
Assembled circular cable, with one 20-pos. and two 14-pos. socket strips (for Emerson Delta V). The cable is suitable for coupling 8- channel modules. Length of cable: 3 m |
| 2832603 |
108Kb/5P |
Ethernet switch, 4 TP RJ45 ports, 3 FO ports, 100 Mbps full duplex in ST-D format, automatic detection of data transmission speed of 10 or 100 Mbps (RJ45), auto crossing function |
| 2305347 |
54Kb/3P |
Round cable assembled with a 20-pos. socket strip and an open end. On the open end, the wires are labeled with 1 to 20 and have ferrules, cable length: 3 m |
| 1425246 |
118Kb/6P |
Network cable, Ethernet CAT5 (100 Mbps), 4-position, PUR, water blue RAL 5021, shielded, Plug straight M12 SPEEDCON / IP67, coding: D, on Plug straight M12 SPEEDCON / IP67, coding: D, cable length: 3 m |
| 2891053 |
46Kb/2P |
The FL DIN RA is installed in a standard, 19-inch rack (EIA-310-D, IEC 60297-3-100) to allow DIN rail mounted equipment to be rack mounted Why buy this product |
| 2740818 |
176Kb/6P |
Inline analog input terminal block, without accessories, 2 inputs, 0-20 mA, 4-20 mA, 짹20 mA, 0-10 V, 짹10 V, 3 dB base frequency at 230 Hz, 2-wire connection method |
| ST-OV3-220DC |
91Kb/5P |
Pluggable power optocoupler, with light indicator and protection circuits in the input and output circuits, input: 220 V DC, output: 24-280 V AC/max. 3 A, can be plugged on basic termination blocks |
| PR2-BSP3 |
79Kb/9P |
Relay socket PR2-B, for industrial relay REL-IR with 2 or 4 PDT, 1/3-level version, spring-cage connections, connection facility for input/interference suppression modules, for mounting on NS 35/7.5 |
| 1401294 |
97Kb/4P |
Sensor/actuator cable, 3-position, PUR, black, free cable end, on Valve connector B (10 mm), with 1 LED,connected with Damping diode, cable length: 1.5 m, With holding current limiting device for energy reduction |
| ST-OV3-12DC |
95Kb/5P |
Plug-in power solid-state relay, with LED and protective circuit in input and output circuits, input: 12 V DC, output: 12 - 60 V DC/max. 3 A, can be plugged into basic terminal blocks |
| ST-OV3-230AC |
95Kb/5P |
Plug-in power solid-state relay, with LED and protective circuit in input and output circuits, input: 230 V AC, output: 12 - 60 V DC/max. 3 A, can be plugged into basic terminal blocks |
| ST-OV3-110DC |
95Kb/5P |
Plug-in power solid-state relay, with LED and protective circuit in input and output circuits, input: 110 V DC, output: 12 - 60 V DC/max. 3 A, can be plugged into basic terminal blocks |
| PLC-OPIT-48DC |
144Kb/6P |
PLC interface, consisting of PLC-BPIT basic terminal block with Push- In connection and pluggable miniature optocoupler, for assembly on DIN rail NS 35/7.5, input: 48 V DC, output: 3-48 V DC/100 mA |
| PR1-BSC3 |
61Kb/4P |
Relay socket PR1..., for miniature power relay or miniature switching relay with 1 or 2 PDT or solid-state relay of same construction, 1/3 level design, screw connections, connection facility for input/interference suppression modules |
| ST-OV3-60DC |
95Kb/5P |
Plug-in power solid-state relay, with LED and protective circuit in input and output circuits, input: 48 - 60 V DC, output: 12 - 60 V DC/max. 3 A, can be plugged into basic terminal blocks |