1. Overview:

️· Device: DGD2110/2113 (likely a driver or gate driver IC, though the specifics aren't explicitly stated)
️· Manufacturer: Diodes Incorporated
️· Document Number: DS38271 Rev. 4 - 2
️· Date: February 2016
️· Website: www.diodes.com

2. Absolute Maximum Ratings:

️· These are the stress limits the device can withstand without permanent damage. Values beyond these could cause device failure. (Specific values are within the tables).
- Lead Temperature (soldering): +300°C
- Storage Temperature Range: -55°C to +150°C

3. Thermal Characteristics:

️· Power Dissipation (Linear Derating): 1.25W
️· Thermal Resistance (Junction to Ambient): 90 °C/W
️· Thermal Resistance (Junction to Case): 45 °C/W
️· Junction Temperature: +150 °C

4. Recommended Operating Conditions:

️· These are conditions under which the device is expected to operate reliably. (Specific values are within the table).
- Logic operation for V S = -4V to +500V
- Logic state held for V S = -4V to -V BS
- VSS limited to -V DD when VDD < 5V.

5. DC Electrical Characteristics:

️· These specify how the device behaves under DC conditions (voltages, currents, etc.). (Specific values are within the table).

6. Key Parameters (with ranges and potential limitations):

️· High-Side Floating Supply Absolute Voltage (VB): VS + 10 to VS + 20 V
️· High-Side Floating Supply Offset Voltage (VS): -4V to +500V (DGD2110) or -4V to +600V (DGD2113) for logic operation.
️· Low-Side Fixed Supply Voltage (VCC): 10 to 20 V
️· Logic Supply Voltage (VDD): VSS + 3 to VSS + 20 V
️· Logic Input Voltage (VIN): VSS to VDD.

Important Notes:

️· "VS" is a critical parameter: It appears to be an offset voltage used to define logic states and operation of the device.
️· "VBS" is mentioned in a note: It seems to be a related parameter defining a boundary condition for the offset voltage.
️· Datasheet limitations: The device operation is sensitive to the value of VS.
️· "Diodes Incorporated" is the supplier.