SMD INDUCTOR DR353-6 SERIES

Features

️· Low Profile Surface Mount Design
️· Flat Top for Pick and Place
️· Inductance Range: 0.12µH to 100.0µH
️· Operating Temperature: -25°C to +85°C
️· Tinned Leads with Leaded Solder Available (note 6)

Electrical Specifications (at 25°C)

| Part No. | Inductance (µH) | DCR (Ω) Max. | I rated (mA) Max. | SRF (MHz) Min. |
| ----------- | --------------- | ------------- | ------------------ | --------------- |
| DR353-6-121 | 0.12 ±20% | 0.112 | 970 | 250 |
| DR353-6-221 | 0.22 ±20% | 0.140 | 850 | 250 |
| DR353-6-471 | 0.47 ±20% | 0.210 | 700 | 180 |
| DR353-6-102 | 1.0 ±20% | 0.364 | 510 | 100 |
| DR353-6-222 | 2.2 ±20% | 0.533 | 430 | 50 |
| DR353-6-472 | 4.7 ±20% | 0.845 | 340 | 31 |

| DR353-6-103 | 10 ±10% | 1.690 | 230 | 20 |
| DR353-6-223 | 22 ±10% | 3.900 | 160 | 14 |
| DR353-6-473 | 47 ±10% | 10.40 | 100 | 10 |
| DR353-6-104 | 100 ±10% | 15.60 | 80 | 7 |

Notes

️· Dimensions are in millimeters (mm).
️· General tolerance is ±0.2mm (unless otherwise specified).
️· `I` rated is based on an approximate 40°C temperature rise.
️· `I` rated is based on an approximate 20% drop in initial value.
️· Tape and reel quantity: 2000 pcs/reel.
️· For non-RoHS parts, replace "DR" prefix with "42-" (e.g., DR353-6 becomes 42-353-6).
️· Terminal finish complies with RoHS requirements. Solder according to J-STD-020D.