1. Product Description:

️· Product: Shielded, wire-wound inductor (specifically Datatronic series DR359-1).
️· Purpose: Used in electronic circuits, likely for filtering, energy storage, or signal manipulation.
️· Range: A range of inductors with values from 100µH (0.1mH) up to 1000µH (1mH).
️· Features: Shielded, wire-wound construction.
️· Datasheet Date: Indicated as January 30, 4003

2. Electrical Specifications (Key Parameters - per line in the table):

️· Inductance (L): Values ranging from 100µH to 1000µH (in 100µH increments).
️· Tolerance: Implied to be within a reasonable percentage around the stated inductance value (exact value not explicitly stated, but typical for inductors).
️· Rated Current (Irms): Varies with inductance value, from 0.61A to 2.44A. (This represents the maximum current the inductor can handle without excessive heating.)
️· Saturation Current (Isat): Represents the current at which the inductance starts to drop significantly due to core saturation. Ranges from 1.14A to 7.57A.
️· DC Resistance (DCR): Not explicitly provided, but suggested by the table of specifications.
️· Q Factor: Not explicitly provided.

3. Mechanical Specifications (limited information):

️· Physical Form: Wire-wound inductor (likely a surface mount device given the modern appearance).
️· Construction: Shielded.
️· Dimensions/Size: Not detailed beyond a general description of a wire-wound inductor.
️· Mounting: Likely Surface Mount.

4. Notes & Markings:

️· Units: Dimensions are in millimeters.
️· Tolerance: General tolerance of ±0.2mm for unspecified dimensions.
️· Inductance Test: Measured at 100kHz with 0.25Vrms.
️· RoHS Compliance: Product is RoHS compliant.
️· Part Numbering: Non-RoHS versions can be identified by replacing the "DR" prefix with "42-".

5. Company Information:

️· Datatronic: Manufacturer located in Romoland, CA.
️· Hong Kong Office: Contact information is provided.

Overall Summary: