# TIGER EYE FLAT IDC WIRE CABLES (FFSD SERIES)

## Specifications
️· Pitch: 1.27 mm (.050")
️· Insulator Material: PBT
️· Contact Material: BeCu
️· Plating: 10 µ" (0.25 µm) Au over 50 µ" (1.27 µm) Ni on contact area; Sn over 50 µ" (1.27 µm) Ni on balance
️· Wire Gauge: 30 AWG
️· Current Rating: 2.3 A per pin (2 pins powered)
️· Operating Temperature: -40 °C to +105 °C
️· Lead Size Accepted: 0.41 mm (.016") SQ
️· Insertion Depth: 2.64 mm (.104") to 3.17 mm (.125")

## Compatible Series
️· FTS, FTSH, EHF, SHF, ESHF

## Available Options
End Options
️· -S: Single End
️· -D: Double End

Other Options
️· -RW: Reverse Wiring (Red wire opposite position #1)
️· -D “XX”: Daisy Chain
️· -SR: Strain Relief (Mates only with ESHF Series - not available with -O, -M, -R or -DXX)
️· -R: Reverse
️· -M: Middle Reverse (Requires -DXX)
️· -O: Outside Reverse (Requires -DXX)

Length
️· Assembled Length (“XX.XX”): Available in custom lengths with MOQ. Standard sizes: -04, -05, -06, -08, -10, -11, -12, -13, -15, -17, -20, -25
️· -N: Notch Polarization (Not available with -04 position)

## Notes
️· This series is non-standard and non-returnable.
️· [samtec.com?FFSD](http://www.samtec.com?FFSD)