1. Product: LPE Transducer/Converter

️· Manufacturer: M-System
️· Model Number: LPE–[1][2]–[3][4] (Indicates configurable options)
️· Purpose: Transforms electrical signals (likely voltage or current) into a different form.

2. Ordering Information & Configuration:

️· Code Structure: The model number uses a four-part code to specify the configuration.
- [1] Input: Specifies the input voltage range.
■ 5: 0 – 150 V AC
■ 6: 0 - 300 V AC
- [2] Output: Specifies the type and range of the output signal.
■ A: 4 – 20 mA DC
■ D: 0 – 20 mA DC
■ E: 0 – 16 mA DC
■ F: 0 – 10 mA DC
■ G: 0 – 1 mA DC
■ Z: (Special Output Range - requires further definition)
- [3] Auxiliary Power: Specifies the auxiliary power supply type and voltage.
■ C: (Standard Value)
■ 0: (Special Value, requires definition)
- [4] Options: Specifies additional features or coatings.
■ Blank: No options
■ Q: With options (specific options require further definition)
️· Special Output Range (Codes Z & 0): Requires separate documentation or contact with M-System to define.
️· Option Codes: Require contacting M-System for details.

3. Technical Specifications:

️· Input:
- Voltage Ranges: 0 - 150V AC, 0 - 300V AC
️· Output:
- Current Ranges: 4 – 20 mA DC, 0 – 20 mA DC, 0 – 16 mA DC, 0 – 10 mA DC, 0 – 1 mA DC
️· Auxiliary Power: The type and voltage are determined by the [3] code.
️· Frequency: 50 or 60 Hz
️· Input Burden: 0.3 VA
️· Overload Capacity: 150% for 10 seconds, 120% continuously
️· Operational Range: 0 – 120% of rating
️· Accuracy: ±0.5% (at 23°C ±10°C or 73.4°F ±18°F, 45 – 65 Hz)
️· Response Time: ≤ 1 second (0 – 100%)
️· Ripple: 0.5% p-p
️· Line Voltage Effect: ±0.1%
️· Insulation Resistance: ≥ 100 MΩ
️· Dielectric Strength: 2000 V AC (to ground)
️· Impulse Withstand Voltage: ±5 kV

4. Physical Characteristics:

️· Construction: Stand-alone unit.
️· Terminal Access: Accessible.
️· Mounting: Surface or DIN rail.
️· Housing Material: Flame-resistant resin (black).
️· Terminal Screw Sizes: M3.5 and M4 (for mounting).
️· Weight: 300 g

5. Options & Coatings:

️· Coatings (Option Q):
- /C01: Silicone coating
- /C02: Polyurethane coating
- /C03: Rubber coating
️· Terminal Screw Material:
- /S01: Stainless steel

Important Notes:

️· Codes Z and 0: Their precise meaning and available values require consultation with M-System.
️· Option Codes (Other than C01, C02, C03, and S01): Their meaning is not specified and require contacting M-System.
️· Diagrams: The document contains schematic diagrams which would be useful in understanding the connections, but I can't describe them textually.